Instructions / Assembly

A
A
D
AA
B
BB
Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
□
□
CAUTION:
Two people are recommended for assembly.
Attaching the storage hook
3
□ Position the storage hook (E) over the holes on the
cabinet (A).
□ Attach with the bolts (BB) and tighten with supplied
hex key (CC).
6
Attaching the casters
□ Be sure the drawers are locked and lay the cabinet (A)
□ emas eht no ,tinu eht ot )D( sretsac leviws eht hcattA
side as the handle, inserting bolts (AA) through the swivel
casters(D) and into the cabinet (A).
□ Tighten with supplied hex key (CC) or 12 mm wrench/socket.
□ Repeat this process for the
xed casters (C) on the
opposite side of the cabinet (A).
□ Return the cabinet (A) to its upright position.
CAUTION: Do not over tighten the bolts.
2
A
E
BB
Installation of Power Cord
4
Untie power cord located inside drawer.
Gently pull cord plug through grommet.
□
□