Installation Guide

Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts
(BB) and tighten with a
wrench (CC).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
2
Attaching the casters
A
s
Be sure the drawers are locked and lay the cabinet (A)
ttach the swivel casters (D) to the unit, on the same
ide as the handle, inserting b through the swivelolts (AA)
casters(D) and into the cabinet (A).
Tighten with a wrench (CC).
Repeat this process for the xed casters (C) on the
opposite side of the cabinet (A).
Return the cabinet (A) to its upright position.
CAUTION: Do not over tighten the bolts .
A
B
BB
D
AA
A
Pa
ckage Contents
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
BB
Part Description
BB
AA
CC
M8 x 25 bolt
M6 x 16 bolt
Wrench
16
4
1
Quantity
CC