Instructions / Assembly

Assembly
Attaching the bottle opener
CAUTION: Do not over tighten the screws.
1
Attaching the cabinet handle
□ Position the cabinet handle (C) over the holes on the
cabinet (B).
□ Attach with the bolts (CC) and tighten with supplied
wrench (EE) or 10mm wrench/socket.
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
NOTE:
There are holes to mount handle on both sides
of cabinet, but only one handle is provided.
2
B
C
F
DD
CC
□ Position the bottle opener (F) over the holes on the
cabinet (B).
□ Attach with the
screws
(DD) and tighten with a
screwdriver.
Attaching the casters
□ Be sure the drawers are locked and lay the cabinet (B)
□
□
□
CAUTION: Do not over tighten the bolts.
3
Attach 2 swivel casters (E) to the cabinet (B), on the
same side as the handle (C) and attach the other 2
swivel casters (E) to the opposite side of the cabinet (B).
Insert bolts (AA) through the washers (BB) and swivel
casters (E) into the cabinet (B).
into the cabinet (B).
Tighten all casters with supplied wrench (EE) or 12 mm
wrench/socket.
□ Return the cabinet (B) to its upright position.
D
D
B
C
(B)
6
AA
BB
E
B
the washers (BB) and