Instructions / Assembly

ManualsBrandsHusky ManualsTool Chest Combos61 in. W x 18 in. D 10-Drawer 1-Door Tool Chest and Cabinet Combo in Black

USE AND CARE GUIDE

61 IN 10 DRAWER TOOL CHEST AND CABINET SET

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m – 7 p.m., EST, Monday-Friday

9 a.m – 6 p.m., EST, Saturday

Item #

Model # H61CH4P/H61TR6

THANK YOU

We appreciate the trust and con

dence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually

create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Husky!

1-888-HD-HUSKY

HUSKYTOOLS.COM

Summary of content (11 pages)

PAGE 1
Item # Model # H61CH4P/H61TR6 USE AND CARE GUIDE 61 IN 10 DRAWER TOOL CHEST AND CABINET SET Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m – 7 p.m., EST, Monday-Friday 9 a.m – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and con dence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Table of Contents .................................................. 2 Assembly ............................................................... 6 Safety Information ............................................... 2 Operation .................................... .......................... 8 Warranty ................................................................ 4 Cordless Power Tool Battery Chargers ............... 9 Specifications ...................................................
PAGE 3
7. Extension cord □ Follow all Extension cord manufacturer’s Warnings and Instructions. □ Do NOT insert extension cord through hole without grommet in place. □ Only use a three-wire extension cord with all three prongs intact. Never remove the round grounding prong. □ Extension cord must be connected to a 125 Volt GFCI protected outlet with proper ground. If GFCI outlet is not available, use an extension cord with GFCI protection built in. □ Check the insulation and plugs of extension cord before using.
PAGE 4
Warranty The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s mishandling.
PAGE 5
Package Contents (continued) NOTE: Chest: Keys are attached to gas strut. NOTE: Cabinet: Keys are inside top drawer. A B C D E Part Description Quantity A Chest 1 B Cabinet 1 C Cabinet handle 1 D Fixed caster 2 E Swivel caster 4 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
PAGE 6
Assembly B CAUTION: Two people are recommended for assembly. 1 Attaching the cabinet handle □ Position the cabinet handle (C) over the holes on the cabinet (B). □ Attach with the bolts (BB) and tighten with supplied hex key (CC). C BB NOTE: The holes in the cabinet are tapped and do not require nuts. 2 Attaching the casters CAUTION: Do not over tighten the bolts. □ Be sure the drawers are locked and lay the cabinet (B) on its top. Use packaging material to protect the finish.
PAGE 7
□ CASTER CONFIGURATION #2: UNIT WILL BE MOVED FREQUENTLY •Attach 2 swivel casters (E) to the cabinet (B), on the same side as the handle (C) and attach the other 2 swivel casters (E) to the center of the cabinet (B). Insert bolts (AA) and swivel caster (E) into the cabinet (B). •Attach 2 fixed casters (D) to the side opposite of the handle (C) by inserting bolts (AA) and the fixed casters (D) into the cabinet (B). □ Tighten all casters with supplied hex key (CC) or 12 mm wrench/socket.
PAGE 8
Operation 1 Removing the drawers □ □ □ Fully extend the empty drawer. Push up the one release lever while pulling down on the other release lever. Pull the drawer outward until it is released from the drawer slide. 2 Re-inserting the drawers □ □ □ 3 Usage of top till rubber grommet □ When passing cords into the box, be sure to always enter box from the rear. After head of cord is in place, slightly pull back 2-3”to ensure weather resistant ”star bursts”are facing toward the outside of box.
PAGE 9
Cordless Power Tool Battery Chargers □ See Charger’s Owner’s Manual for proper use and care of charger and batteries. Follow all Warnings and Instructions provided with your battery charger. □ Place chargers and electrical connections in till. □ Chargers are for use in dry locations only. Do NOT expose to liquid, vapor, or rain. Should your charger become wet, Do NOT attempt to use. Unplug extension cord from supply before handling wet charger or cords.
PAGE 10
Replacement Parts For assistance with replacement parts please call 1-888-HD-HUSKY.
PAGE 11
Questions, problems, missing parts? Before returning to the store call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.