Instructions / Assembly

CAUTION:
Two people are recommended for assembly.
Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
□
□
Attaching the storage hook
2
□ Position the storage hook (D) over the holes on the
cabinet (A).
□ Attach hook (D) using bolts (BB) and tighten with
supplied hex key (CC).
CAUTION: Do not over tighten the bolts.
NOTE:
There are holes to mount handle on either side
of cabinet, but only one handle is provided.
Attaching the bottle opener
CAUTION: Do not over tighten the bolts.
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
3
Installation of Power Cord
4
□ Position the bottle opener (C)
over the holes on the
cabinet (A).
□
Untie power cord located inside drawer.
Gently pull cord plug through grommet.
□
□
6
B
A
BB
A
D
BB
C
BB
A
CAUTION: after removing the wood pallet and all
packaging, use the hex key (CC) or a 12mm socket
wrench to tighten all 16 caster bolts, which may have
become loose during shipment.