Instructions / Assembly

Store tiles in a moist-free environment at a minimum
of 65˚ F for at least 48 hours prior to installation.
Ensure that the floor surface is smooth, level, dry and
clean. Patch or fill any large holes.
Lay tiles (do not connect) out across front of garage with
teeth pushed against door track.
Add a row down the middle to determine where the sides
and back end. Leave the same distance to the wall on
each side. (*A = less than 9”)
1
Clean and Prep Floor Surface
4
Align each tooth of the adjoining tile and lightly tap with a
rubber mallet (do not use a regular hammer).
NOTE: If a tooth does not set all the way, use the wood
handle to push and turn the tooth in.
3
Connecting Tiles
4
Tile Installation
Make sure the front row is straight and square,
continue to fill in the rest of the tiles by working from
left to right and front to back.
*A *A
2
Layout Tiles
Installation
5 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
CLEANING
Clean dirt and/or debris by sweeping, vacuuming, or using a wet mop.
Clean soiled surfaces by mopping or scrubbing with mild detergent.
For heavy cleaning, a rotary scrubber with soft pad or nylon brushes should be used.
Avoid prolonged sun exposure to prevent color fading and warpage.
This product is NOT recommended for exterior installations or applications that are exposed to continuous moisture and
or grease.
Fill in tiles on both sides and rear by cutting each tile to fit
with a utility knife.
It is critical that a 1/4" to 1/2" gap from each wall for
expansion and contraction.
Trace a pattern for cutting irregular shapes.
5
Cut to Fit
Installation
1/4” - 1/2”
*A
Care & Maintenance
NOTE: Optional HUSKY Interlocking Garage Flooring Trim
Kits can be found on HomeDepot.com ITM # 1005172364;
ITM # 1005172363.
*A
*A