Instructions / Assembly

Assembly (continued)

10.

Square the workbench and then securely tighten all fasteners with a

Screw the four leveling feet (D) or casters (I) all the way into the leg

assemblies to the maximum depth. Some adjustment may be

Using two or more people, stand the workbench in its upright

necessary after the workbench is in the desired location to properly

position.

level and use the product.

10 mm and 13 mm wrench.

Note: Use caution to not overtighten.

11.

Install the crank handle (C) into the shaft in the corner below the

Caster installation

Leveling feet installation

wood top as shown.

Option 2: Attach the support rail (H) to the bottom of the leg (B) and

7b.

leg (E) using four M8x15L bolts (BB) and four M8 washers (CC).

Finger tighten only.

Note: Use caution to not overtighten.

Note: Leveling feet have been pre-assembled on the leg.