Instructions / Assembly

Operation
Height Adjustment
HUSKYTOOLS.COM
Leveling Foot Adjustment
IMPORTANT : Ensure there is no weight on top of the
workbench when leveling.
8

1

2
□
Adjust each leveling foot (D) to the desired elevation with
□
Turn the lock nut counterclockwise to elevate and clockwise
a 5/8 in. wrench as shown.
to lower the leveling foot.
□
□
□
The steel in this product has been coated with industrial powder
harsh chemicals such as oil or grease to remain on the powder
®
coating surface. Use a glass cleaner ( Windex or equivalent product)
□
The wood top is made of Parawood (also called Rubberwood), which
®
cleaned with most gentle household cleaners, such as Windex .
Insert the crank handle (C) into the shaft and align it in the hole
until it is engaged.
To raise the table, turn the crank handle counterclockwise to
the desired height.
To lower the table, turn the crank handle clockwise until it
reaches the desired height.
To avoid damage, do not keep turning the crank handle once
□
□
□
Do not allow chemicals, water, or other substances to remain on the
to the wood.
Note: Some minor squeaking is normal when operating the
crank. Lubrication is not needed.
Maintenance
Please contact 1-888-HD-HUSKY for further assistance.
it has rested at its highest or lowest position.
Care and Cleaning
Maintaining the casters
□ Grease the casters annually using high quality
bearing grease.

1
coating for a durable finish. To help protect this finish, do not allow
to clean and maintain all powder coated surfaces.
has a polyurethane coating to help protect it from moisture. It can be
wood top for extended periods of time to reduce the risk of damage