SKU/THD.com # Model # HOTC6210BB1D USE AND CARE GUIDE HUSKY HD 62 IN. 10-DRAWER MOBILE WORKBENCH Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m.- 6 p.m., EST, Saturday 1 888 HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this mobile workbench. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ............................................... 2 Assembly ............................................................... 6 Safety Information ............................................. 2-3 Operation ................................................................ 7 Warranty ............................................................ 3 Maintenance .......................................................... 8 Pre-Assembly ......................................
Safety Information (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-assembly (continued) PACKAGE CONTENTS A K J M H B I F C N L E D G Part Description Quantity Part Description Quantity A B Stainless steel top Side handle 1 1 H I Power strip bracket Key (set) 2 1 C D Rolling cabinet Swivel caster with brake 1 4 J K Lock Drawer liner 1 10 E F Soft close drawer slide (pair) Drawer 4 10 L M Drawer slide (pair) Power strip 2 2 G Fixed caster 2 N Corner guard 2 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly 1 Attaching the side handle 2 Attaching the power strip brackets □ Attach the power strip brackets (H) to the cabinet for both sides using two bolts (AA) each. □ Tighten all bolts using a screwdriver. Do not over tighten the bolts to avoid damage to the finish. □ Attach the side handle (B) to the cabinet using four bolts (EE). □ Tighten all bolts with the 10 mm wrench (GG). Do not over tighten the bolts to avoid damage to the finish.
Operation 1 2 Removing the drawers Locking and unlocking the unit □ Fully extend and empty the drawer. □ On the slide, lift up the plastic release lever on one slide and push down the plastic release lever on the other slide. Gently pull the drawer out so the slides can ride over the stops. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. □ To lock the unit, insert the key (I) into the lock (J) and turn it one quarter turn counterclockwise. Then remove the key.
Maintenance 2 1 Maintaining the casters □ Grease the casters annually using high quality bearing grease. Maintaining the drawers □ Periodically clean the drawer trim and inside the drawers with a mild detergent and water. □ Remove grease and oil with a standard, nonflammable cleaning fluid. □ The use of drawer liners is recommended to protect the finish inside the drawers and make the drawers easier to clean. Drawer liners can be purchased at The Home Depot.
Service Parts A K J M H B I F C N L E D G Part Quantity Part Code Description A B DTC61008 Stainless steel top DTC04012 Side handle 1 1 D K03220373 Swivel caster with brake 4 E G DTC35032 Soft close drawer slide (pair) K03220371 Fixed caster 4 2 H I DTC500011 Power strip bracket K06120123 Key (set) 2 1 J K06120124 Lock K K0129151 1 10 L DTC35026 Drawer slide (pair) 2 M K2415024C Power strip 2 Drawer liner 9 HUSKYTOOLS.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m. EST Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
SKU# THD.com# Model# HOTC62XDBB1U USE AND CARE GUIDE HUSKY HD 62 IN. HUTCH Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m.- 6 p.m., EST, Saturday 1 888 HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.....................................................................2 Operation...........................................................................6 Safety Information...................................................................2-3 Care and Cleaning..........................................................7 Warranty.......................................................................................3 Service Parts.......................................
Safety Information (continued) WARNING: The chest-cabinet is intended for household use. WARNING : Do not allow the product to fall from high places. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size. BB CC DD GG II JJ Part Part Code Description BB CC DD GG II JJ L034534C L0345001 L044514G L3011002 L2015091 L2015092 Bolt M6 x 12L Bolt M6 x 15L Washer M6 10MM/13MM Wrench Plastic plug (M6) Plastic plug (M8) Quantity 4 4 4 1 2 8 SPECIFICATIONS Maximum capacity (total unit) 200 lbs NOTE: Begin product assembly close to the final intended location of your chest/cabinet.
Pre-assembly (continued) PACKAGE CONTENTS I J P O S R N M Z2 Q Part Description Quantity I Key (set) 1 J Lock 1 M Power strip 2 N Corner guard 2 O Handle 4 P Hutch 1 Q LED work light (long) 1 R Grommet 2 S Gas lift 2 Z2 Reinforcement panel 1 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Operation 1 Locking and unlocking the unit 2 Opening the top chest lid □ Open the top chest lid to 90 degrees first. □ Push it into the top chest’s inside-bottom. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. IMPORTANT : The lid must be fully closed before moving the unit. □ To lock the unit, insert the key (I) into the lock (J) and turn it one quarter turn counterclockwise. Then remove the key.
Care and Cleaning □ This steel product has been coated with industrial powder coating for a durable finish. □ To help protect the powder coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface. □ Use a glass cleaner (Windex R or equivalent product) to clean and maintain all surfaces of powder coating.
Service Parts I J P O S R N M Z2 Q Part Part Code Description I K06120123 Key (set) 1 J K06120124 Lock 1 M K2415024C Power strip 2 O DTC04005 Handle 4 Q D60003 LED work light (long) 1 R L2065001 Grommet 2 S K0509047 Gas lift 2 Z2 D09007B Reinforcement panel 1 8 Quantity HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
SKU/THD.com # Model # HOTC24XDBB1F USE AND CARE GUIDE HUSKY HD 24 IN. TALL SIDE LOCKER Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m.- 6 p.m., EST, Saturday 1 888 HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this mobile workbench. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ............................................... 2 Assembly ............................................................... 6-7 Safety Information ............................................. 2-3 Operation ................................................................ 8 Warranty ............................................................ 3 Maintenance .......................................................... 8 Pre-Assembly ....................................
Safety Information (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-assembly (continued) PACKAGE CONTENTS Z4 W V M H J Z2 B I N Z3 U D Part Description Quantity Part Description Quantity B Side handle 1 N Corner guard 2 D Swivel caster with brake 4 U Shelf 3 H Power strip bracket 2 V Coat hook 1 I Key (set) 1 W Side locker 1 J Lock 1 Z2 Reinforcement Panel 1 M Power strip 1 Z3 Support Base Plate 1 Z4 Shelf clips 12 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly 1 Attaching the side handle 2 Attaching the power strip brackets □ Attach the power strip brackets (H) to the cabinet for both sides using two bolts (AA) each. □ Tighten all bolts using a screwdriver. Do not over tighten the bolts to avoid damage to the finish. □ Attach the side handle (B) to the cabinet using four bolts (EE). □ Tighten all bolts with the 10 mm wrench (GG). Do not over tighten the bolts to avoid damage to the finish.
Assembly 5 The door can be reversed to left and right □ □ □ □ □ □ Remove the door of the side locker (W) by removing the bolts inside the hinge of the side locker. Remove the magnets on the top and botton of the side locker (W) by removing the bolts. Re-install the magnets on the other side of the side locker with the bolts. Flip the door and reorient to the other side. Re-install the door with the bolts along the hinge located on the side of the side locker. Tighten all bolts using a screwdriver.
Operation Maintenance Locking and unlocking the unit Maintaining the casters IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. □ Grease the casters annually using high quality bearing grease. □ To lock the unit, insert the key (I) into the lock (J) and turn it one quarter turn counterclockwise. Then remove the key. □ To unlock the unit, insert the key (I) into the lock (J) and turn it one quarter turn clockwise. Then remove the key.
Service Parts Z4 W V M H J Z2 B I N Z3 U D Part Part Code B DTC04012 Side handle 1 D K03220372 Swivel caster with brake 4 H DTC500011 Power strip bracket 2 I K06120123 Key (set) 1 J K06120124 Lock 1 M K2415024C Power strip 1 U Description Quantity B4B100TC24E6158A Shelf 3 Z2 D09007B Reinforcement Panel 1 Z3 D09016B Support Base Plate 1 Z4 B30150MD36E2485A Shelf clips 9 12 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m. EST Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
THD.com# Model# HOTC55XDBB1H USE AND CARE GUIDE HUSKY HD 55 IN. OVERHEAD LOCKER Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m.- 6 p.m., EST, Saturday 1 888 HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.....................................................................2 Assembly............................................................................6 Safety Information...................................................................2-3 Operation...........................................................................6 Warranty.......................................................................................3 Care and Cleaning..........................
Safety Information (continued) WARNING: The chest-cabinet is intended for household use. WARNING : Do not allow the product to fall from high places. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size. KK LL Part Part Code Description KK LL L034554M860 L044515J Bolt M8 x 60L Washer M8 Quantity 4 4 SPECIFICATIONS Maximum capacity (total unit) 900 lbs NOTE: Begin product assembly close to the final intended location of your chest/cabinet. This product is heavy and may be difficult to move after assembly.
Pre-assembly (continued) PACKAGE CONTENTS I J X O S N R K Part Description Quantity I Key (set) 1 J Lock 1 K Drawer liner 1 N Corner guard 2 O Handle 4 R Grommet 2 S Gas lift 2 X Overhead locker 1 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Operation Assembly Installing the drawer liner Locking and unlocking the unit □ Place the drawer liners (K) in appropriately sized drawers and the chest lid area to protect the surface. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. □ To lock the unit, insert the key (I) into the lock (J) and turn it one quarter turn counterclockwise. Then remove the key. □ To unlock the unit, insert the key (I) into the lock (J) and turn it one quarter turn clockwise.
Service Parts I J X O S N R K Part Part Code Description I K06120123 Key (set) 1 J K06120124 Lock 1 K K0129153 Drawer liner 1 O DTC04005 Handle 4 R L2065001 Grommet 2 S K0509012 Gas lift 2 7 Quantity HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
Mobile workbench & Hutch Husky HD 62 in. Hutch is only intended to be used with the Husky Heavy Duty system, which includes the following products : Husky HD 62 in. 10-drawer Mobile Workbench Model # HOTC6210BB1D SKU # XXXXXXXXXX SKU # XXXXXXXXXX Husky HD 62 in. Hutch Model # HOTC62XDBB1U Husky HD 24 in. Tall Side Locker Model # HOTC24XDBB1F SKU # XXXXXXXXXX Husky HD 55 in. Overhead Locker Model # HOTC55XDBB1H SKU # XXXXXXXXXX 1 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly 1 Placing the hutch 2 Installing the bolts □ Use 4 pcs M6*15mm bolts (CC) and 4 pcs M6 washer (II) to secure the Hutch along the sides and back to the Workbench. □ Tighten with a 8mm socket or wrench. NOTE: Two people may be required to complete this step. □ Place the Hutch (P) on top of the Rolling Cabinet (C).
Mobile workbench & Hutch & Side locker Husky HD 24 in. Tall Side Locker is only intended to be used with the Husky Heavy Duty system, which includes the following products : Husky HD 62 in. 10-drawer Mobile Workbench Model # HOTC6210BB1D SKU # XXXXXXXXXX SKU # XXXXXXXXXX Husky HD 62 in. Hutch Model # HOTC62XDBB1U Husky HD 24 in. Tall Side Locker Model # HOTC24XDBB1F SKU # XXXXXXXXXX Husky HD 55 in. Overhead Locker Model # HOTC55XDBB1H SKU # XXXXXXXXXX 3 HUSKYTOOLS.
Assembly 1 Removing the side parts 2 □ Remove the all side parts from the cabinet by loosening the bolts. Attach Locker support base plate CAUTION: Lock ALL wheels of the workbench. NOTE: If assembling the Side Locker (W) to left side of the workbench, then remove all parts on the left side of cabinets. If assembling the Side Locker (W) to right side of the workbench, then remove all parts on the right side of cabinets.
Assembly (continued) 5 Tightening the side locker □ Open the door of the side locker (W). 6 □ Tighten the 9 bolts (FF) inside the panel. Inserting the plastic plugs □ Insert the Plastic Plugs (HH&II&JJ) into the remaining open holes on the side walls of the modular set. □ Tighten with a 8mm socket or wrench. W HH II FF JJ 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Mobile workbench & Hutch & Side locker & Overhead locker Husky HD 55 in. Overhead Locker is only intended to be used with the Husky Heavy Duty system, which includes the following products : Husky HD 62 in. 10-drawer Mobile Workbench Model # HOTC6210BB1D SKU # XXXXXXXXXX SKU # XXXXXXXXXX Husky HD 62 in. Hutch Model # HOTC62XDBB1U Husky HD 24 in. Tall Side Locker Model # HOTC24XDBB1F SKU # XXXXXXXXXX Husky HD 55 in.
Assembly 1 Placing the overhead locker 2 Installing the bolts. □ Use 4 pcs M8*60mm bolts (KK) and 4 pcs M8 washers (LL) to secure the overhead locker along the top of the modular set. □ Tighten all screws securely with a screwdriver. NOTE: Two people may be required to complete this step. □ Place the Overhead Locker (X) on top of the modular set.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
