Item #1000053038 Model #HOTC4010B5ERS USE AND CARE GUIDE 40 IN. 10-DRAWER TOOL CHEST AND CABINET SET- BLACK POWDER COATED Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m - 6 p.m., EST, Monday-Friday 1-888-43 -HUSKY HUSKYTOOLS.
Table of Contents Table of Contents ...................................................... 2 Assembly ............................................................... Safety Information ........................................................ 2 Warranty ...................................................................... 3 Pre-Assembly...................................................... Operation ................................................................ 7 Maintenance ......................
Warranty The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles 10 mm. Wrench 13 mm. Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC Part Description AA Bolt M6x15L 4 BB Washer M8 16 CC Bolt M8x20L Screw M4x8L 16 DD Quantity 8 SPECIFICATIONS Maximum capacity (chest) 280 lbs. Maximum capacity (cabinet) 520 lbs. Empty weight (chest) 94 lbs. Empty weight (cabinet) 154 lbs.
Pre-assembly (continued) PACKAGE CONTENTS A L B C J K D E I F H G Part Quantity Part A Description Gas lift 2 H Regular caster 2 B Top chest 1 I Drawer 10 C Bracket 2 J Lock 2 D Side handle 1 K Key (set) 2 E Rolling cabinet 1 L Husky badge 2 F Swivel caster with brake 2 G Drawer slide (pair) 11 5 Description Quantity HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
Assembly 2 Installing the casters 1 Attaching the side handle □ Attach the side handle (D) to the rolling cabinet (E) using six bolts (AA). CAUTION: Do not over-tighten the screws. NOTE: The holes in the cabinet are tapped and do not require nuts. □ Ensure all cabinet drawers are securely locked into place using the key lock on the rolling cabinet (E). □ Lay the rolling cabinet (E) on its back. Use the packaging material to protect the finish.
Operation 2 Removing the drawers 1 Locking and unlocking the unit □ Fully extend and empty the drawer. □ Depending on the slide, either lift or lower the release lever on both sides so the slides can ride over the stops. Pull out to remove. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. □ □ □ □ Insert the key (K) and turn it fully to the left to lock. Remove the key (K). Insert the key (K) and turn it fully to the right to unlock. Remove the key (K).
Maintenance 2 1 Maintaining the casters Maintaining the drawers □ Periodically clean the drawer trim, and inside the drawers with a mild detergent and water. □ Remove grease and oil with a standard, nonflammable cleaning fluid. □ The use of drawer liners is recommended to protect the finish inside the drawers and make the drawers easier to clean. Drawer liners can be purchased at The Home Depot and can be cleaned with soap . and water. □ Lubricate the slides semi-annually with grease or equivalent.
Service Parts A C J K D E F H G Part Description Quantity A Gas lift 2 C Bracket 2 D Side handle 1 F Swivel caster with brake 2 G Drawer slide (pair) 11 H Regular caster 2 J Lock 2 K Key (set) 2 9 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
Questions, problems, missingparts? Before returning to the store, call Husky Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-888-43-HUS KY HUSKYTOOLS.COM Retain this manual for future use.
