Use and Care Manual

Assembly
Attaching the side handle Installing the casters
□
Attach the side handle D to the rolling cabinet E() ()
using six bolts ().AA
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
Ensure all cabinet drawers are securely locked into
□ Lay the rolling cabinet (E) on its back Use the.
packaging material to protect the finish.
□ Mount the two swivel casters with brake (F) to the rolling
cabinet (E) using four bolts (CC) and washers (BB) per
caster wivel casters with brake (F) should. The s be
□ Mount the two regular casters (H) to the rolling
cabinet (E) using four bolts (CC) and washers (BB) per
□ Tighten all bolts with a 13 mm wrench.
□ Return the rolling cabinet (E) to its upright position.
CAUTION: .Do not over-tighten the screws
BB
CC
Placing the chest
□ Place the top chest (B) on top of the rolling cabinet (E).
NOTE: Two people may be required to complete
this step.
□
place using the key lock on the rolling cabinet (E).
Installing the brackets
□ Attach the brackets (C) to the back of the
Place the brackets over cabinet (E). the holes and
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
□
Tighten all screws securely with a screwdriver.
product to secure the top chest (B) to the rolling
be installed on the same side as the side handle.
caster.
F
E
secure with four screws (DD) per bracket.
AA
D
E
DD
C
B
E
6
1
2
3
4
B
E