Use and Care Manual

Assembly
1
Attaching the side handle
2
Installing the casters
□
Attach the side handle D to the rolling cabinet E() ()
using six bolts ().AA
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
Ensure all cabinet drawers are securely locked into
□ Lay the rolling cabinet E on its back Use the() .
packaging material to protect the finish.
□ Mount the four swivel casters with brake F to the()
rolling cabinet (E) using four bolts ()CC and washers
(. ()BB) per caster wivel casters with brake FThe s
□ Mount the two regular casters H to the center()
the rolling cabinet (E) using four bolts (CC) and
□ Tighten all bolts with a wrench.
□ Return the rolling cabinet (E) to its upright position.
CAUTION: .Do not over tighten the screws
3
Placing the chest
□ Place the top chest (B) on top of the rolling cabinet (E).
NOTE: Two people may be required to complete
this step.
□
place using the key lock on the rolling cabinet (E).
4
Installing the brackets
□ Attach the brackets (C) to the back of the
Place the brackets over cabinet (E). the holes and
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
□
Tighten all screws securely with a screwdriver.
DD
C
product to secure the top chest (B) to the rolling
6
should be installed on e .ach end at the cabinet
washers BB) per caster(.
B
E
secure with four screws (DD) per bracket.
D
E
AA
E
F
BB
CC
B
E