Instructions / Assembly

Operation
Locking and unlocking the unit
IMPORTANT: The drawers must be fully closed before
locking / unlocking the unit.
7

1
□
To lock the unit, insert the key (I) into the lock (J) and turn
□
To unlock the unit, insert the key (I) into the lock (J) and
it one quarter turn counterclockwise. Then remove the key.
turn it one quarter turn clockwise. Then remove the key.
I
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
Slightly insert one side and repeat for the other side.

3
Removing the drawers
□ Fully extend and empty the drawer.

2
□ On the slide, lift up the plastic release lever on one slide
and push down the plastic release lever on the other slide.
Gently pull the drawer out so the slides can ride over
the stops.
HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.