Instructions / Assembly

ManualsBrandsHusky ManualsTools & Hardware33 in. 4-Drawer Mechanics Tool Cart, Black

Pre-Assembly

TOOLS REQUIRED

Phillips

screwdriver

Safety

goggles

13 mm

Wrench

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part

Description

Quantity

AA Screw M6x15L

BB Washer M8

Bolt M8x15L

SPECIFICATIONS

Maximum capacity (per drawer)

75 lbs.

NOTE: Begin product assembly close to the final

intended location of your tool cart. This product is

heavy and may be difficult to move after assembly.

Bottom tray

250 lbs.

Maximum loading capacity

672 lbs.

Screw 3/16 in.

Summary of content (6 pages)

PAGE 1
Pre-Assembly TOOLS REQUIRED Phillips screwdriver Safety goggles 13 mm Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part CC BB Description DD Quantity AA Screw M6x15L BB Washer M8 16 CC DD Bolt M8x15L Screw 3/16 in. 16 2 36 SPECIFICATIONS Maximum capacity (per drawer) 75 lbs. Bottom tray Maximum loading capacity 250 lbs. 672 lbs. NOTE: Begin product assembly close to the final intended location of your tool cart.
PAGE 2
Pre-Assembly (continued) PACKAGE CONTENTS A C D B P J E O N G K F H L I M Part Quantity Part A Gas lift 2 I Tray 1 B Cabinet 1 J Lock 1 C Lid handle 1 K Keys (set) 1 D Side handle 1 L Front rail 1 E Cross support - R 1 M Drawer slide (pair) 4 F Swivel caster with brake 2 N Pegboard 1 G Legs 4 O Cross support - L 1 2 P Husky badge 1 H Description Rigid caster 5 Description Quantity HUSKYTOOLS.
PAGE 3
Assembly 1 2 Installing the legs Installing the casters NOTE: Do not fully tighten bolts yet to allow for some movement during cabinet installation. CAUTION: Do not over tighten the bolts. □ Mount the four support legs (G) to the tray (I) using four screws (AA) per leg. Finger tighten only. □ Place tray (I) on its side on top of the packaging material while mounting casters to protect the product`s finish.
PAGE 4
Assembly (continued) 5 6 Installing the cabinet Attaching the legs □ Secure the cabinet (B) to the four legs (G) using twelve screws (AA). □ Tighten all screws on the cart at this time. Be careful not to over tighten. WARNING: At least two people are needed for this step. □ Carefully lower the cabinet (B) between the four support legs (G) until each support leg is properly secured under the top lip of the cabinet and the holes are in alignment.
PAGE 5
Operation 1 Locking and unlocking the lid 2 Securing the drawers IMPORTANT: The key will only lock the top lid and does not lock the drawers. See step 2 for securing the drawers. IMPORTANT: The drawers must be fully closed before locking / unlocking the unit. □ Insert the key (K) into the lock and turn one quarter turn counterclockwise to lock. □ Remove the key (K). □ Insert the key (K) into the lock and turn one quarter turn clockwise to unlock. □ Remove the key (K).
PAGE 6
Maintenance 1 2 Maintaining the casters □ Grease the casters annually using high quality bearing grease. Care and Cleaning □ This steel product has been coated with industrial powder coating for a durable finish. □ To help protect the powder coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface. ® □ Use a glass cleaner (Windex or equivalent product) to clean and maintain all surfaces of powder coating.