Use and Care Manual

Assembly (continued)
7
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
7
Attaching the handles
□ Attach the side handle (D) to the tool cart using four
6
5
Installing the cabinet
□ Carefully lower the cabinet (B) between the four support legs (G)
until each support leg is properly secured under the top lip of
Attaching the legs
□ Secure the cabinet (B) to the four legs (G) using twelve
□ Attach the lid handle (C) to the top lid using two screws (DD) .
AA
DD
D
the cabinet and the holes are in alignment.
AA
NOTE: The holes in the tool cart are tapped and do not
require nuts.
C
WARNING:
At least two people are needed for this step.
screws (AA).
□ Tighten all screws on the cart at this time. Be careful not
to over tighten.
screws (AA). Do not over tighten.
Do not over tighten.
B
G
B
G