Item #1000 000 000 Model #HOUC3603B1QWK USE AND CARE GUIDE 36 IN. -3 DRAWER TOOL CART WITH WOOD TOP Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m - 6 p.m., EST, Monday-Friday 1-888-43-HUSKY HUSKYTOOLS.
Table of Contents Table of Contents.....................................................................2 Assembly............................................................................6 Safety Information...................................................................2 Operation...........................................................................8 Warranty.......................................................................................3 Maintenance..................................
Warranty The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service.
Pre-Assembly TOOLS REQUIRED Phillips screwdriver Safety goggles 13 mm Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part BB Description CC Quantity 32 AA Screw M6x12L BB Washer M8 16 Bolt M8x20L 16 CC SPECIFICATIONS Maximum capacity (drawers) 150 lbs. Empty weight 77 lbs. Maximum product weight, including contents 500 lbs. NOTE: Begin product assembly close to the final intended location of your tool cart .
Pre-Assembly (continued) PACKAGE CONTENTS K A J I B H C G D E F Part Description Quantity Part Description Rigid caster Quantity 2 A Wood top 1 G B Side handle 1 H Key (set) 1 4 I Drawer 3 J Lock 2 K Husky badge 1 C Legs D Swivel caster with brake 2 E Tray 1 F Drawer slide (pair) 3 5 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
Assembly 1 Installing the legs 2 □ Ensure all cabinet drawers are securely locked into place using the lock (J) on the cart. □ Lay the cart upside down. Use the packaging material to protect the wood top from damage during assembly. □ Mount the four legs (C) to the cart using six screws (AA) per leg. Do not install four of the screws (AA) in the legs of the tool cart on the side adjacent to the Husky badge (K). The side handle (B) will be mounted here in a later step.
Assembly (continued) 5 Attaching the side handle NOTE: The holes in the tool cart are tapped and do not require nuts. □ □ Attach the side handle (B) to the tool cart using four screws (AA). B AA 7 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
Operation 1 Locking and unlocking the unit 2 Removing the drawers □ Fully extend and empty the drawer. □ Depending on the slide, either lift or lower the release lever on both sides so the slides can ride over the stops. Pull out to remove. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit. □ Insert the key (H) into the lock and turn it fully to the left to lock. □ Remove the key (H). □ Insert the key (H) into the lock and turn it fully to the right to unlock.
Maintenance 1 2 Maintaining the casters □ Grease the casters annually using high quality bearing grease. Care and Cleaning □ This steel product has been coated with industrial powder coating for a durable finish. □ To help protect the powder coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface. ® □ Use a glass cleaner (Windex or equivalent product) to clean and maintain all surfaces of powder coating.
Service Parts K A J I B H C G D E F Part Description Quantity A Wood top 1 B Side handle 1 C Leg 4 D Swivel caster with brake 2 E Tray 1 F Drawer slide (pair) 3 G Rigid caster 2 H Key (set) 1 I Drawer 3 J Lock 1 K Husky badge 1 10 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
Questions, problems, missingparts? Before returning to the store, call Husky Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-888-43-HUS KY HUSKYTOOLS.COM Retain this manual for future use.
