Item 296020 Model # HPL4136-VT USE AND CARE GUIDE 2 TON TROLLEY JAC K Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this SUV Jack. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information ......................... 2 Care and Cleaning ........................... 6 Inspection ............................................. 6 Warranty ......................................... 3 Maintenance .................................... 6 To add hydraulic jack oil ...................... 6 To replace hydraulic jack oil ................. 7 Lubrication ........................................... 7 Storing..................................................
Warranty The manufacturer warrants the products to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service.
Package Contents Part A B C D E F G H I J Description Handle Nut M12 Washer Release Valve Oil Fill Plug Hydraulic Ram C Ring Nut M10 Washer Wheel Part K L M N O P Q R S 4 Description Saddle Carrying Handle Lifting Arm Frame Nut M8 Spring Washer Caster Washer Spring
Operation HOW IT WORKS The jack power unit consists of plunger, plunger cavity, hydraulic oil reservoir, cylinder and ram. An upward stroke of the jack handle draws oil from the reservoir into the plunger cavity. Hydraulic pressure closes a valve that keeps oil in the cavity. A downward stroke of the jack handle forces oil into the cylinder, pushing out the ram and raising the saddle.
Operation (Continued) WARNING: To avoid pinching or crushing hands or feet, ALWAYS keep them clear of the jack hinge and ground contact area when lowering the vehicle. The jack is a lifting device only. DO NOT move or dolly the vehicle while it is on the jack Care and Cleaning INSPECTION The product shall be maintained according to these instructions. You may not alter this product in any way. 1. Before using, a thorough inspection shall be made on the jack.
Maintenance (Continued) TO REPLACE HYDRAULIC JACK OIL 1 2 Opening the Release Valve Open the release valve by turning handle counterclockwise. 3 Removing the Plug Remove oil fill plug. 4 Draining the Old Oil Turn entire jack over so that all of the old oil will drain out of the oil fill hole. Leveling the Jack After all of the old oil has drained out of the jack, turn the jack back over to a level position fill with new oil.
Maintenance (Continued) STORING 1 2 Place Saddle in the Lowest Position When jack is not in use, or when storing the jack, ALWAYS have the saddle in its lowest (down) position. Store in a Level Position It is recommended the jack be stored in a dry location with all wheels touching the ground on a relatively level position. RUST PREVENTION Check ram and pump piston every two months (or sooner, based on usage) for any signs of rust or corrosion. Clean as needed and wipe down with an oil cloth.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM Retain this manual for future use.
