Instructions / Assembly

13 Please contact 1-888-HD-HUSKY

HUSKYTOOLS.COM

for further assistance.

At the desired height, re-install the outer slides by pushing the rear clip into the back channel support, then pushing

the front clip down into the front support. Repeat this process for the other side. Ensure the slides are properly seated

and level.

Fully extend the slides out and gently insert the inner slide brackets of the tray into the outer slides, being careful they

are properly aligned.

Once properly inserted, completely close the tray to set the slides in their proper position and lock into the soft close

mechanism.

Step 2

Step 1

□

Tray

Adding Drawer Liner Adhesive Tape

Use 4 pcs of Drawer Liner Adhesive Tape (JJ) to help secure the drawer liners in each drawer. The tape helps prevent

shifting of the drawer liner during normal use.

□

Remove the plastic plug (Optional)

Remove the 19 plastic plugs (HH) and 18 plastic plugs (II) from the side locker side panels and front if needed.

□