Instructions / Assembly

CAUTION:
Two people are recommended for assembly.
Assembly
1
Attaching the Cabinet Handles
Position the Cabinet handle (B) over the holes on the
Cabinet (A).
Attach with the Bolts (AA) and tighten with supplied
Hex key (BB).
□
□
Attaching the Storage Hook
2
□ Position the Storage hook (C) over the holes on the
Cabinet (A).
□ Attach Hook (C) using Bolts (AA) and tighten with
supplied Hex key (BB).
CAUTION: Do not over tighten the bolts.
Installation of Power Cord
3
Untie power cord located inside drawer.
Gently pull cord plug through grommet.
□
□
Wrap any loose or excess cord around the Cord
Storage Hooks (C).
□
6
B
A
AA
CAUTION: after removing the wood pallet and all
packaging, use the Hex key (BB) or a 12mm socket
wrench to tighten all 16 caster bolts, which may have
become loose during shipment.
A
C
AA
Repeat this process on the opposite side of
Cabinet (A).
□
Plastic Plugs
4
CC
DD
CC
DD
Insert the Plastic Plugs (CC&DD) into the remaining
open holes on the side walls of the Cabinet (A) per
the diagram below.
□