Instructions / Assembly

Remove the Power outlet (C) from the left wall of the Locker (A) by removing the 6 Phillips head screws from the outlet panel
cover (D) and gently pulling the Power outlet (C) and holder from the cabinet.
□
7 Please contact 1-888-HD-HUSKY
HUSKYTOOLS.COM
for further assistance.
Installing Locker to right side of Workbench
Remove the door of the Locker (A) by removing the 11 Phillips head bolts inside the hinge of the Locker (A). Flip the door and
re-orient to the other side. Then re-install the door with the 11 Phillips head bolts along the hinge located on the right side of
the Locker (A).
Ensure the door is level and centered in the opening before tightening the 11 bolts.
Remove the Kwikset Smartkey® lock cylinder from the door, ip and reinstall for proper key orientation.
1
□
□
□
Opening
direction
A
A
A
C
D
Opening
direction