Instructions / Assembly

9 Please contact 1-888-HD-HUSKY
HUSKYTOOLS.COM
for further assistance.
If desired, add the blank plate (E) to the outside of the Locker (A) using the 6 Phillips head screws to cover the power
outlet opening.
E
FF
E
Attaching the Casters
Be sure the door is locked and lay the Locker (A) down.
Use packaging material to protect the nish.
Peel off the paper back from the 3 EVA Spacers (FF), and afx in the appropriate position toward the rear of the Locker A.
- If mounting to the LEFT side of the Workbench, then see Figure (3-1).
- If mounting to the RIGHT side of the Workbench, then see Figure (3-2).
Figure (3-1) Figure (3-2)
4
Attaching the EVA Spacers
3
If assembling Locker (A) to the right side of the Workbench,
then casters will mount to the right side.
□
Attach the swivel casters (B) to the outer side of the Locker (A),
by inserting 8 M8 Bolts (AA) and washers (BB) through the swivel
caster (B). Use the Hex Key (GG) to tighten the bolts to the
bottom frame.
Note: If assembling Locker (A) to the left side of the Workbench,
then casters will mount to the left side.
□
□
B
AA
BB
A