Instructions / Assembly

Operation
1
Removing the drawers
3
Kwikset Smartkey® Lock Operation
2
Re-inserting the drawers
Fully extend the empty drawer.
□
□
□
□
elihw revel esaeler eno on pu hsuP pulling down on
the other release lever.
□ Gently pull the drawer outward until it is released
from the drawer slide.
Extend the drawer slides.
□
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the drawer
to set the slides in their proper positions.
7 Please contact 1-888-HD-HUSKY
HUSKYTOOLS.COM
for further assistance.
This product has been equipped with the Kwikset Smartkey® locks which allow you to easily program each lock
cylinder to a specific key code to match other Kwikset keyed products.
Adding drawer liner adhesive tape
5
Use 4 pcs. of Drawer Liner Adhesive Tape (EE) to help secure the drawer liners in each drawer. The tape helps prevent
shifting of the drawer liner during normal use.
□
The lock cylinders have been factory keyed to the corresponding alphabetic lettering found on the Kwikset Smartkey®
label located on the back of the key chain, as well as afxed to the product itself.
Please see the Kwikset Smartkey® supplemental instructions for keying and re-keying the locks.
□
A
Retain This Label
For Key Identification
ONE KE Y FO R ALL YO UR L OCKS
TM