User Guide

ManualsBrandsHusky ManualsOtherHRDC-EDGE-GATE-060814

141

2006.08

Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.

Nozzle Selection

EDGE GATE DESIGN INFORMATION

EDGE GATE Nozzle Pitch

Minimum nozzle pitch dimensions for the Edge Gate nozzle are

provided on the right and below. For applications that exceed 16

drops, .

Edge Gate - EG-S / EG-L

NOTE:The sprue minimum radius 40.4 mm (1.60") and the X

and

Y minimum distances must all be satisfied.

• For 8 or fewer drops x and

y must be greater than 45.0 mm

(1.77").

• For 12 drops and greater, x and

y must be greater than 76.2

mm (3.00").

Edge Gate - EG-S / EG-L

NOTE: Minimum distance between outermost nozzle drop center

to outer edge of the manifold plate is 125mm (4.921”). If reduced

distance is required, contact Husky.

44.5

[1.75]

44.5

[1.75]

R 40.4

[1.60]

MIN

Summary of content (7 pages)

PAGE 1
Nozzle Selection EDGE GATE DESIGN INFORMATION EDGE GATE Nozzle Pitch Edge Gate - EG-S / EG-L Minimum nozzle pitch dimensions for the Edge Gate nozzle are provided on the right and below. For applications that exceed 16 drops, . R 40.4 [1.60] MIN X Edge Gate - EG-S / EG-L • For 8 or fewer drops x and y must be greater than 45.0 mm (1.77"). • For 12 drops and greater, x and y must be greater than 76.2 mm (3.00"). 44.5 [1.75] Y NOTE:The sprue minimum radius 40.4 mm (1.
PAGE 2
EG-S Nozzle Selection Plate Sizing - Pocket Detail 25.5 [1.00] SL 0.03 44.01 +- 0.00 0.001 [1.733 +- 0.000 ] R 3.0 [0.12] R 1.5 [0.06] 70.0 - 140.0 [2.76 - 5.51] L 22.0 - 113.0 [0.87 - 4.45] N K 62.0 [2.44] 5.03 + 0.03 x 7.5 DP [0.198 + 0.001 x 0.30] S J 40.00 [1.574] For more than 16 drops 31.0 [1.22] Nominal dimensions shown for layout purpose only. Actual dimensions dependent on operating temperatures.
PAGE 3
Nozzle Selection EG-S Gate Detail- 2 Gates Per Drop NOTE: CUSTOMER MUST SELECT AN APPROPRIATE DATUM FEATURE “C” TO ACHIEVE ACCURATE POSITION OF GATES 15.75 [.6201] (4.592) [(.1808)] 2X 60 2X R 7.875 [.31] 2X M IMP .0315 +.0016 0.8 +0.04 0 -0 S 0.2 A B C .008 A B C .002 A B C IMP M IMP 31.0 + 0.2 [1.22 + .008] A .0004 A 0.005 M IMP .0002 90 +0.5 R 3 + 0.2 [.12 + .008] View C-C 2 Places S C 0.62 + 0.1 [.0246 +.0039] LAND DETAIL B 2 Places (12) [(.472)] 60 +0.5 R 0.8 + 0.2 [.03 + .
PAGE 4
EG-S Nozzle Selection Gate Detail- 4 Gates Per Drop NOTE: CUSTOMER MUST SELECT AN APPROPRIATE DATUM FEATURE “C” TO ACHIEVE ACCURATE POSITION OF GATES .0315 +.0016 0.8 +0.04 0 -0 31.0 + 0.2 [1.22 + .008] 0.05 A B C .02 A B M .002 A B C IMP M 0.5 A B C IMP 15 +0.5 M .001 A B IMP R 3 + 0.2 [.12 + .008] 2 X FULL R View C-C 4 Places S C 0.62 + 0.1 [.0246 +.0039] LAND DETAIL B 4 Places .002 A B C IMP 0.4 0.03 A B 0.05 A B C M 60 +0.5 1.59 [.
PAGE 5
Nozzle Selection EG-L Plate Sizing - Pocket Detail S J 40.00 [1.574] K 36.0 [1.42] R 3.0 [0.12] R 1.5 [0.06] SL 8.00 [0.315] 5.03 + 0.03 x 7.5 DP [0.198 + 0.001 x 0.30] L 35.0 - 122.5 [1.38 - 4.82] 25.5 [1.00] 80.0 - 140.0 [3.15 - 5.51] N 62.0 [2.44] For more than 8 drops. 42.0 [1.65] Nominal dimensions shown for layout purpose only. Actual dimensions dependent on operating temperatures. Thermal Calculations BL / K / L / N / SL - Refer to the plate calculator at http://www.husky.
PAGE 6
EG-L Nozzle Selection Gate Detail - 2 Gates Per Drop 22.1 [.8701] (7.614) [(.2998)] NOTE: CUSTOMER MUST SELECT AN APPROPRIATE DATUM FEATURE “C” TO ACHIEVE ACCURATE POSITION OF GATES 18.6 [.7323] (2.012) [(.0792)] (5.65) [(.2222)] 4X R 3.175 [.125] 2X 60 2X R 11.05 [.435] 0.05 A B C M .002 A B C IMP 2X IMP S 2X R 5 [.1969] T 15 +0.5 42.0 + 0.2 [1.654 + .008] 0.5 A B .02 A B M 0.4 IMP 0.4 A .0004 A M .0002 IMP M IMP 90 +0.5 60 +0.5 R 3 + 0.2 [.12 + .008] R 0.8 + 0.2 [.03 + .
PAGE 7
Nozzle Selection EG-L Gate Detail - 4 Gates Per Drop NOTE: CUSTOMER MUST SELECT AN APPROPRIATE DATUM FEATURE “C” TO ACHIEVE ACCURATE POSITION OF GATES .0315 +.0016 0.8 +0.04 0 -0 0.05 A B C 15 +0.5 M .0004 A IMP 0.005 M .0002 IMP 0.4 .03 A B R 3 + 0.2 [.12 + .008] R 0.8 + 0.2 [.03 + .008] A B M IMP (13) [(.512)] .001 0.05 A B C M 90 +0.5 60 +0.5 View C-C 4 Places .039 +.0012 1 +0.03 -0 0 22.1 + 0.2 [.8701 + .0008] 1 + 0.2 [.039 + .008] L - 11.00 + 0.2 [L - .433 + .