User Guide

2006.08

Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.

Nozzle Selection Ultra 250 HS

Dimensions

Design Criteria

• Ultra 250 hot sprues are designed using customer specified PL, LR, RAD, orifice, melt operating temperature, and

mold temperature.

• If required PL is outside published range, extended lead times may apply. Please contact Husky.

• Actual BL dimension is a function of PL, tip selection, nozzle housing selection and operating conditions.

• Actual BL dimension will be provided after system design. If a specific BL is required please contact Husky

Ultra 250 Hot Sprue ‘A’ Dimension Chart (Thermal Gate)

PL (Plate Length) LR DIA LR RELIEF DIA RAD ORIFICE

HT-D/HT-T/HT-U: 86.22 (3.394") - 206.4 (8.129")

HT-DX/HT-TX: 98.76 (3.888") - 219.02 (8.622")

101.31 (3.99")

101.57 (4")

100 (3.94")

120 (4.72")

125 (4.92")

160 (6.30")

105 (4.13")

124 (4.88")

129 (5.08")

163.71 (6.45")

FLAT

10.00 (.394")

12.70 (.500")

15.50 (.610")

6.35 (.25")

8.00 (.315")