User manual To ensure safe operation, please read this user manual thoroughly before use. © 2017 Husky. Husky reserve the right to change specifications at any time without notice. Images used are for illustration only. Stock not included.
Welcome to your new Husky Thank you for buying this Husky chiller. It has been designed and manufactured for many years of trouble-free service. Operation is very simple, but please take a few minutes to read this user manual. It contains important safety information, and tips to ensure you receive the best possible service from your Husky unit. All models Important Notes WARNING: RISK OF ELECTRICAL SHOCK HAZARD CONTENTS Important Notes......................................................................
The manufacturer does not accept responsibility for any damages that may arise due to nonobservation of these instructions. • Do not use the unit if it is damaged. If you are in any doubt, consult an engineer. • Connection and installation of your Husky unit are to be carried out in strict compliance with the relative instructions in this user manual. • Make sure there is a suitable power outlet with proper grounding to power the chiller.
General operating instructions for all models Operating Instructions Exploded Diagrams INTERIOR LIGHT The interior light may be switched on or off using the rocker switch on the inside right-hand wall of the cabinet (see Fig. 2 on page 7). REPLACING LED LIGHTS 1. 2. 3. 4. Disconnect the chiller from the power supply. Remove the light cover, pull out the wires and remove the LED lights. Install the new LED lights, connect the wires, and replace the light cover. Reconnect the chiller to the power supply.
AdditionalRange Standard model-specific and Solid instructions Door Range for C1, C2, & C3 Standard Range and Solid Door Range C1, C2, & C3 Circuit Diagrams • T hese instructions should be read in conjunction with the general operating instructions on pp6&7. C1H-840/865/900 & C2H/S-840/865/900 Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT C2H-865 (Sweden) The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings.
AdditionalRange Standard model-specific and Solid instructions Door Range for C1, C2, & C3 PRO Range C1PRO, C2PRO, & C3PRO Circuit Diagrams • T hese instructions should be read in conjunction with the general operating instructions on pp6&7. C1PROH-840/865/900 & C2PROH/S-840/865/900 Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT C3PROH/S-840/865/900 The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings.
Additional model-specific instructions for AlFresco Range C1ALF, C2ALF, & C3ALF Circuit Diagrams • T hese instructions should be read in conjunction with the general operating instructions on pp6&7. ALF-C1 Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT ALF-C2 The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings. When the unit is operating normally, the display will show the current temperature. To display the set temperature press the button.
Additional model-specific instructions for Intelligenzia Range C1ITH, C2ITH, & C3ITH • T hese instructions should be read in conjunction with the general operating instructions on pp6&7. Circuit Diagrams C1ITH-840/865/900 Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT C2ITH-840/865/900 The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings. When the unit is operating normally, the display will show the current temperature.
AdditionalRange Standard model-specific and Solid instructions Door Range for C1, C2, & C3 Below Zero Range C1ZZ, C2ZZ, & C3ZZ Circuit Diagrams • T hese instructions should be read in conjunction with the general operating instructions on pp6&7. C1ZZH-840/865/900 & C2ZZH/S-840/865/900 Operating Instructions TO OPERATE THE ELECTRONIC THERMOSTAT C3ZZH/S-840/865/900 The thermostat has been pre-set, and in most cases it is not necessary to adjust the settings.
AdditionalRange Standard model-specific and Solid instructions Door Range for C1, C2, & C3 Combi model C2COMBI Circuit Diagram • T hese instructions should be read in conjunction with the general operating instructions on pp6&7.
AdditionalRange Standard model-specific and Solid instructions Door Range for C1, C2, & C3 Drawer model C2DWR Standard • IMPORTANT Range SAFETY and Solid INSTRUCTIONS Door Range C1, C2, & C3 for Drawer model C2DWR only • T hese instructions should be read in conjunction with the general operating instructions on pp6&7, Please see page 21 for an important safety note applicable to this model only.
Additional model-specific instructions for Drawer model C2DWR Circuit Diagram C2DWR Wiring Diagram ELECTRONIC THERMOSTAT SF-102SBQ 22 23
Welcome to Husky, the home of smart refrigeration. We are a leading global refrigeration specialist with over 25 years experience in quality refrigeration for convenience and hospitality professionals, and we have a great range of chillers for the home too. You’ll find Husky products all over the world, so whatever your requirements we’re sure to have a good looking energy-efficient model that’s perfect for you. www.husky-international.com www.husky.co.