Use and Care Manual

6



Operation – Inflate Tires

Connectingtheinflator

Operatingtheinflator

□ Placetheinflatoronaflatsurface.

□ Plugthepowercordintoagrounded120voltoutlet.

□ Connectthequickconnectvalveadaptor(J)tothe

tireairvalvebypushingthevalveleveronthe

adaptor(J)downuntilitissecurelyattachedtothe

tireairvalve.



CAUTION: Donotover‐inflatetheitembeinginflated.

Followthemanufacturer’ssuggestedPSIlevelsonthe

itemyouareinflating.

□ MovetheOn/Offswitch(A)totheI positiontoturn

theinflatoron.MonitorthePSIonthepressuregauge

(C)tofillyouritemtothedesiredpressure.

□ Onceyouhavereachedyourdesiredairpressure,

movetheOn/Offswitch(A)totheOposition.

Disconnectingtheinflator 

□ Removetheairhose(K)fromthetirebyliftingupon

thequickconnectvalve(J)leverandremovingthe

valve(J).

□ Unplugthepowercordfromthe120Voltoutletand

allowtheinflatortocool.

