Instructions / Assembly

1 Removing the drawers

• Fully extend the empty drawer.

• Push up the one release lever while pulling down on the

other release lever.

• Pull the drawer outward until it is released from the

drawer slide.

2 Re-inserting the drawers

• Extend the drawer slides.

• Insert the brackets on each side of the drawer into the

slots in the slides, being careful that they are properly

positioned.

• Once properly inserted, completely close the drawer to

set the slides in their proper positions.

3 Usage of the top till grommets

• When passing cords into the box, be sure to always enter

the box from the rear.

• BE SURE TO FOLLOW ALL ELECTRICAL SAFETY

PRECAUTIONS.

Operation