Hot Runner Systems FP-Series For use with Futaba standard mold bases 2006.07 Information and specifications subject to change without notice. For latest product information please refer to www.hotrunners.com English Metric 2006.
PRONTO PRONTO FP-Series Hot Runner Systems HUSKY offers a full line of standard plate size hot runners which have all the features of our custom systems but are offered at lower cost and faster deliveries. FP-series plates have been designed to mate with Futaba industry-standard mold sets and the manifolds have been designed to provide a large degree of flexibility when laying out cavities.
PRONTO PRONTO Hot Runner System Design Guidelines Electrical Connectors Optional 6.35mm (1/4") platen insulator board available (not shown) Manifold Thermocouple Ultra 750 Nozzle VG Available With 1.0mm (0.039"), 1.8mm (0.071"), or 2.5mm (0.098") Gate Diameter Ultra 500 VG/VX available with 1.0mm (0.039"), 1.2mm (0.047"), 1.5mm (0.059") or 1.8mm (0.
PRONTO PRONTO Hot Runner System Selection Pronto Hot Runners are designed to mate directly with the most popular industry standard mold bases. Replacing the top clamp plate of a standard mold set with a Husky hot runner will give you a complete runnerless mold solution. Pronto FPseries systems are available with 40 different sizes of plates which can be ordered with three styles of 2 drop, two styles of 4 drop, and one style of 8 drop manifolds.
PRONTO 2 Drop A-Type Orientation OPERATOR TOP Electrical Air (Valve Gate) Cooling water DROPS ALIGNED WITH LONG SIDE OF PLATES X 2 Drop B-Type Orientation Electrical Air (Valve Gate) Cooling water OPERATOR TOP DROPS ALIGNED WITH LONG SIDE OF PLATES X Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky. FP-series 2006.
PRONTO 2 Drop C-Type Orientation OPERATOR TOP Electrical Air (Valve Gate) Cooling water DROPS ALIGNED WITH SHORT SIDE OF PLATES X Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky. 6 FP-series 2006.
PRONTO 4 Drop L-Type Orientation OPERATOR TOP Electrical Air (Valve Gate) Y Cooling water DROPS ALIGNED WITH LONG SIDE OF PLATES X 4 Drop H-Type Orientation Y OPERATOR TOP X 4 Drop H-Type Advantage The 4 drop H-Type provides increased flexibility concerning drop positioning (note- all drops are symmetrical to one another), X and Y are independent of each other. Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky. FP-series 2006.
PRONTO 8 Drop H-Type Orientation Air (Valve Gate) TOP OPERATOR Electrical X Cooling water Y1 Y2 Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky. FP-series 2006.
PRONTO Platen mounting - Two choices of platen mounting are available: • The backing plate width, W, can be larger than the manifold plate for direct platen bolting. Husky will not install any clamp slots or holes for platen mounting screws. • The backing plate width, W, can be the same as the manifold plate and Husky will install clamp slots on the long sides of the plates.
PRONTO PRONTO clamp slot configurations 16 mm TOP OF MOLD OPERATOR SIDE OF MOLD 35 mm 28mm Clamp slot configuration for 2A, 4H, 4L, 8H(HT/ TS) and 8B(HT/TS)-Type orientations. 16 mm TOP OF MOLD 16 mm TOP OF MOLD OPERATOR SIDE OF MOLD 102mm 28mm 72mm Clamp slot configuration for 2B Type orientations. 28mm 100mm 65mm OPERATOR SIDE OF MOLD Clamp slot configuration for 2C Type orientations.
PRONTO To configure Pronto hot runners follow the three simple steps below. 1 Determine the nozzle pitch required for the mold design and ensure that it is within the allowable range for the desired size of plates. 2 Select the gating method suitable to your application 3 Select the desired nozzle length based on L-dimension range available for the selected gating style For example for a 400 x 700 hot runner with a 2 drop, 750 nozzle size, 58.
PRONTO 250.0 X 400.0 250.0 X 450.0 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.0 X 300.0 300.0 X 350.0 300.0 X 450.0 300.0 X 550.0 300.0 X 600.0 330.0 X 350.0 330.0 X 450.0 350.0 X 350.0 350.0 X 450.0 350.0 X 500.0 350.0 X 600.0 400.0 X 400.0 400.0 X 500.0 400.0 X 600.0 400.0 X 700.0 450.0 X 450.0 450.0 X 550.0 450.0 X 600.0 500.0 X 500.0 500.0 X 700.0 550.0 X 550.0 550.0 X 650.0 550.0 X 750.0 600.0 X 600.0 600.0 X 700.0 600.0 X 800.
PRONTO Width x Length 4L-Type Max. ’X’ (HT) 4L-Type Max. ’X’ (VG) FP2540 FP2545 FP2550 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 400.0 250.0 X 450.0 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.0 X 300.0 300.
PRONTO 4H-Type Max. ’Y1’ FP2530 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.0 X 300.0 300.0 X 350.0 300.0 X 450.0 300.0 X 550.0 300.0 X 600.0 330.0 X 350.0 330.0 X 450.0 350.
PRONTO 4H-Type Max. ’Y2’ FP2530 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.0 X 300.0 300.0 X 350.0 300.0 X 450.0 300.0 X 550.0 300.0 X 600.0 330.0 X 350.0 330.0 X 450.0 350.
PRONTO Width x Length 8H-Type Max. ’X’ 8H-Type Max. ’Y1’ 8H-Type Max. ’Y2’ FP2540 FP2545 FP2550 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 400.0 250.0 X 450.0 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.
PRONTO Width x Length 8H-Type Max. ’X’ 8H-Type Max. ’Y1’ 8H-Type Max. ’Y2’ FP2540 FP2545 FP2550 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 400.0 250.0 X 450.0 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.
PRONTO Width x Length 8H-Type Max. ’X’ 8H-Type Max. ’Y1’ 8H-Type Max. ’Y2’ FP2540 FP2545 FP2550 FP2730 FP2735 FP2740 FP2750 FP2930 FP2935 FP2940 FP3030 FP3035 FP3045 FP3055 FP3060 FP3335 FP3345 FP3535 FP3545 FP3550 FP3560 FP4040 FP4050 FP4060 FP4070 FP4545 FP4555 FP4560 FP5050 FP5070 FP5555 FP5565 FP5575 FP6060 FP6070 FP6080 FP6565 FP6575 FP7070 FP7080 250.0 X 400.0 250.0 X 450.0 250.0 X 500.0 270.0 X 300.0 270.0 X 350.0 270.0 X 400.0 270.0 X 500.0 290.0 X 300.0 290.0 X 350.0 290.0 X 400.0 300.
PRONTO STEP 2 - Select the gating method Pronto hot runners are available with the Ultra 500 or Ultra 750 nozzles in HT, TS, VG, or VX gating styles. Please refer to www.hotrunners.com or the Hot Runner Design Center for details about each nozzle/gating style. STEP 3 - Ensure the desired L-dimension is within the allowable guidelines of the gating method. Available L-Dimensions (Ultra 500) HT-D/HT-T/HT-U/HT-X/HT-DC HT-X VG VX 17mm (0.67") 124mm (4.88") 27mm (1.06") 134mm (5.28") 17mm (0.67") 124mm (4.
PRONTO Available L-Dimensions (Ultra 750) VG VX TS 27.4mm (1.08") 134.3mm (5.29") 27.4mm (1.08") 134.3mm (5.29") 27.4mm (1.08") 124.3mm (4.89") 27.4mm (1.08") 134.3mm (5.29") Plate Thickness For 8 Drop Configurations 32mm (1.26") Plate Thickness For 2 and 4 Drop Configurations 40mm (1.57") Min Max HT-D/HT-T/HT-U/HT-X/HT-DC 95mm - 105mm (3.74" - 4.13" ) 115mm - 125mm (4.53" - 4.97" ) Thermal Gate (HT & TS) L-Dimension 60mm (2.36") 60mm (2.
PRONTO FP2540 250.00 x 400.00 Min Max W (2A) W (2B) 250.00 400.00 350.00 500.00 W 250,00 W 400,00 16.00 DIA GUIDE PIN (4) 400,00 50,00 129,00 OFFSET GUIDE PIN 100,00 165,00 M12 - Select 1 from each quadrant OFFSET GUIDE PIN 131,00 250,00 67,00 75,00 100,00 16.
PRONTO FP2545 250.00 x 450.00 Min Max W (2A) W (2B) 250.00 450.00 350.00 550.00 W 250,00 W 450,00 16.00 DIA GUIDE PIN (4) OFFSET GUIDE PIN 154,00 M12 Select one from each quadrant 450,00 190,00 156,00 100,00 50,00 250,00 67,00 75,00 100,00 16.00 DIA GUIDE PIN (4) 154,00 OFFSET GUIDE PIN M12 Select one from each quadrant 50,00 100,00 156,00 190,00 2B ONLY 67,00 75,00 100,00 2A & 4L ONLY N/A= Not Available Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.756") VG/VX 60mm (2.
PRONTO FP2550 250.00 x 500.00 Min Max W (2A) W (2B) 250.00 500.00 350.00 600.
PRONTO FP2735 270.00 x 300.00 Min Max W 270.00 470.00 W 270,00 300,00 25,00 OFFSET GUIDE PIN 125,00 90,00 55,00 88,00 16,0 DIA GUIDE PIN (4) M12 Select at least one from each quadrant 72,00 83,00 110,00 2A ONLY Available manifold sizes 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 8H-Type Min X Max X 60mm (HT/TS only) N/A N/A N/A N/A N/A 65mm (2.
PRONTO FP2735 270.00 x 350.00 Min Max W (2A) W (2B) 270.00 350.00 470.00 550.00 W 270,00 W 350,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 113,00 350,00 150,00 115,00 80,00 M12 Select at least one from each quadrant OFFSET GUIDE PIN 113,00 72,00 83,00 110,00 270,00 16.0 DIA GUIDE PIN (4) M12 Select at least one from each quadrant 80,00 115,00 150,00 2B ONLY 72,00 83,00 110,00 2A ONLY Available manifold sizes Min X 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 8H-Type 60mm (2.
PRONTO FP2740 270.00 x 400.00 Min Max W (2A) W (2B) 270.00 400.00 470.00 600.00 W 270,00 W 400,00 16.0 DIA GUIDE PIN (4) 138,00 175,00 140,00 105,00 70,00 M12 Select at least two from each quadrant 400,00 72,00 83,00 110,00 270,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 138,00 OFFSET GUIDE PIN M12 Select at least two from each quadrant 70,00 105,00 140,00 175,00 2B ONLY 72,00 83,00 110,00 2A ONLY Available manifold sizes Min X 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 8H-Type 60mm (2.
PRONTO FP2750 270.00 x 500.00 W (2A) W (2B) 270.00 500.00 470.00 700.00 Min Max W 270,00 W 500,00 16.0 DIA GUIDE PIN 188,00 OFFSET GUIDE PIN M12 Select at least two from each quadrant OFFSET GUIDE PIN 500,00 225,00 190,00 155,00 113,00 71,00 270,00 72,00 83,00 110,00 16.
PRONTO FP2930 290.00 x 300.00 Min Max W 290.00 490.00 W 290,00 OFFSET GUIDE PIN 300,00 30,00 125,00 90,00 55,00 88,00 16.0 DIA GUIDE PIN (4) M12 Select at least one from each quadrant 82,00 93,00 120,00 2A ONLY N/A= Not Available Available manifold sizes 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 8H-Type Min X Max X 60.00 (thermal gate) N/A N/A N/A N/A N/A 65mm (2.
PRONTO FP2935 290.00 x 350.00 Min Max W (2A) W (2B) 290.00 350.00 490.00 550.00 W 290,00 W 350,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 113,00 113,00 OFFSET GUIDE PIN 350,00 M12 Select at least one from each quadrant 150,00 115,00 80,00 290,00 82,00 93,00 120,00 16.
PRONTO FP2940 290.00 x 400.00 W (2A) W (2B) 290.00 400.00 490.00 600.00 Min Max W 290,00 W 400,00 16.0 DIA GUIDE PIN (4) M12 Select at least 2 per quadrant OFFSET GUIDE PIN 138,00 175,00 140,00 105,00 68,00 290,00 400,00 16.0 DIA GUIDE PIN (4) 138,00 82,00 93,00 120,00 OFFSET GUIDE PIN 68,00 105,00 140,00 175,00 M12 Select at least 2 per quadrant 82,00 93,00 120,00 2B ONLY 2A & 4H ONLY N/A= Not Available Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.756") VG/VX 60mm (2.
PRONTO FP3030 300.00 x 300.00 Min Max W 300.00 500.00 W 300,00 125,00 90,00 OFFSET GUIDE PIN 300,00 88,00 48,00 23,00 16.0 DIA GUIDE PIN (4) M12 Select at least 1 per quadrant 77,00 83,00 125,00 2A ONLY N/A= Not Available Available manifold sizes 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 8H-Type Min X Max X 60.00 (thermal gate) N/A N/A N/A N/A N/A 65mm (2.
PRONTO FP3035 300.00 x 350.00 Min Max W (2A) W (2B) 300.00 350.00 500.00 550.00 W 300,00 W 350,00 112,00 150,00 114,00 70,00 M12 Select at least 1 per quadrant OFFSET GUIDE PIN OFFSET GUIDE PIN 350,00 300,00 77,00 83,00 125,00 16.0 DIA GUIDE PIN (4) 112,00 16.0 DIA GUIDE PIN (4) 70,00 114,00 150,00 M12 Select at least 1 per quadrant 77,00 83,00 125,00 2B ONLY 2A & 4H ONLY Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.756") VG/VX 60mm (2.362") HT/TS 2B-Type 70mm (2.
PRONTO FP3045 300.00 x 450.00 W (2A) W (2B) 300.00 450.00 500.00 650.00 Min Max W 300,00 W 450,00 16.0 DIA GUIDE PIN (4) 450,00 163,00 115,00 73,00 200,00 165,00 83,00 125,00 77,00 M12 Select at least 2 per quadrant OFFSET GUIDE PIN 16.
PRONTO FP3055 300.00 x 550.00 W (2A) W (2B) 300.00 550.00 500.00 750.00 Min Max W 300,00 W 550,00 16.0 DIA GUIDE PIN (4) 70,00 213,00 250,00 215,00 150,00 110,00 M12 Select at least 2 per quadrant OFFSET GUIDE PIN 110,00 150,00 215,00 250,00 550,00 70,00 300,00 16.
PRONTO FP3060 300.00 x 600.00 W (2A) W (2B) 300.00 600.00 500.00 800.00 Min Max W 300,00 W 600,00 16.0 DIA GUIDE PIN (4) 300,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 238,00 275,00 240,00 185,00 134,00 83,00 M12 Select at least 2 per quadrant M12 Select at least 2 per quadrant 600,00 77,00 83,00 125,00 238,00 OFFSET GUIDE PIN 83,00 134,00 185,00 240,00 275,00 77,00 83,00 125,00 2B ONLY 2A, 4L & 4H ONLY N/A= Not Available Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.
PRONTO FP3335 330.00 x 350.00 Min Max W (2A) W (2B) 330.00 350.00 530.00 550.00 W 330,00 W 350,00 16.0 DIA GUIDE PIN (4) M12 - Select at least 1 per quadrant OFFSET GUIDE PIN 103,00 OFFSET GUIDE PIN 350,00 103,00 150,00 105,00 65,00 330,00 87,00 111,00 140,00 16.0 DIA GUIDE PIN (4) M12 Select at least 1 per quadrant 65,00 105,00 150,00 87,00 111,00 140,00 2B ONLY 2A & 4H ONLY Available manifold sizes Min X 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 60mm (2.362") HT/ TS 70mm (2.
PRONTO FP3345 330.00 x 450.00 Min Max W (2A) W (2B) 330.00 450.00 530.00 650.00 W 330,00 W 450,00 M12 Select at least 2 per quadrant OFFSET GUIDE PIN 153,00 OFFSET GUIDE PIN 450,00 200,00 155,00 115,00 78,00 330,00 87,00 111,00 140,00 16.0 DIA GUIDE PIN (4) 153,00 16.0 DIA GUIDE PIN (4) 78,00 115,00 155,00 200,00 M12 Select at least 2 per quadrant 87,00 111,00 140,00 2A, 4L & 4H ONLY 2B ONLY N/A= Not Available Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.756") VG/VX 60mm (2.
PRONTO FP3535 350.00 x 350.00 Min Max W 350.00 550.00 W 350,00 W 350,00 OFFSET GUIDE PIN 103,00 M12 Select at least 2 per quadrant OFFSET GUIDE PIN 350,00 150,00 105,00 65,00 350,00 16.0 DIA GUIDE PIN (4) 103,00 77,00 102,00 120,00 150,00 16.0 DIA GUIDE PIN (4) M12 Select at least 2 per quadrant 77,00 102,00 120,00 150,00 65,00 105,00 150,00 2B ONLY 2A & 4H ONLY N/A= Not Available Available manifold sizes Min X 60mm (2.362") HT/TS 70mm (2.756") VG/ VX 60mm (2.
PRONTO FP3545 350.00 x 450.00 Min Max W (2A) W (2B) 350.00 450.00 550.00 650.00 W 350,00 W 450,00 M12 Select at least 2 per quadrant OFFSET GUIDE PIN 153,00 450,00 200,00 155,00 105,00 68,00 350,00 77,00 102,00 120,00 150,00 16.0 DIA GUIDE PIN (4) 153,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN M12 Select at least 2 per quadrant 68,00 105,00 155,00 200,00 77,00 102,00 120,00 150,00 2B ONLY 2A, 4L & 4H ONLY Available manifold sizes Min X 2A-Type 2B-Type 2C-Type 4L-Type 4H-Type 60mm (2.
PRONTO FP3550 350.00 x 500.00 W (2A) W (2B) 350.00 500.00 550.00 700.00 Min Max W 350,00 W 500,00 16.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 168,00 M12 Select at least 2 from each quadrant 500,00 220,00 170,00 125,00 78,00 350,00 82,00 107,00 115,00 150,00 16.
PRONTO FP3560 350.00 x 600.00 Min Max W (2A) W (2B) 350.00 600.00 550.00 800.00 W 350,00 W 600,00 GUIDE PIN (4) 16.0 DIA M12 Select at least 3 from each quadrant OFFSET GUIDE PIN 600,00 M12 Select at least 3 from each quadrant 270,00 220,00 175,00 127,00 79,00 350,00 82,00 107,00 115,00 150,00 GUIDE PIN (4) 16.
PRONTO FP4040 400.00 x 400.00 W 400.00 550.00 Min Max W 400,00 W 400,00 16.0 DIA GUIDE PIN (4) 400,00 55,00 175,00 117,00 80,00 M12 Select at least 2 from each quadrant OFFSET GUIDE PIN OFFSET GUIDE PIN 115,00 77,00 112,00 139,00 175,00 400,00 16.
PRONTO FP4050 400.00 x 500.00 Min Max W (2A) W (2B) 400.00 500.00 550.00 650.00 W 400,00 W 500,00 16.0 DIA GUIDE PIN (4) M12 Select at least 2 from each quadrant OFFSET GUIDE PIN 165,00 500,00 165,00 OFFSET GUIDE PIN 225,00 167,00 125,00 77,00 400,00 77,00 112,00 139,00 175,00 16.
PRONTO FP4060 400.00 x 600.00 Min Max W (2A) W (2B) 400.00 600.00 550.00 750.00 W 400,00 W 600,00 16.0 DIA GUIE PIN (4) M12 Select at least 3 from each quadrant OFFSET GUIDE PIN 600,00 275,00 217,00 175,00 127,00 79,00 400,00 77,00 112,00 139,00 175,00 16.0 DIA GUIE PIN (4) 215,00 OFFSET GUIDE PIN M12 Select at least 3 from each quadrant 79,00 127,00 175,00 217,00 275,00 215,00 77,00 112,00 139,00 175,00 2B ONLY 2A, 2C, 4L, 4H, & 8H ONLY Available manifold sizes Min X 60mm (2.
PRONTO FP4070 400.00 x 700.00 Min Max W (2A) W (2B) 400.00 700.00 550.00 850.00 W 400,00 W 700,00 16.0 DIA GUIDE PIN (4) M12 Select at least 3 from each quadrant 325,00 OFFSET GUIDE PIN 700,00 267,00 220,00 173,00 126,00 79,00 400,00 77,00 112,00 139,00 175,00 16.
PRONTO FP4545 450.00 x 450.00 W 450.00 550.00 Min Max W 450,00 W 450,00 OFFSET GUIDE PIN 132,00 M12 Select at least 3 from each quadrant OFFSET GUIDE PIN 450,00 200,00 134,00 98,00 70,00 450,00 82,00 107,00 132,00 158,00 200,00 20.0 DIA GUIDE PIN (4) 132,00 20.0 DIA GUIDE PIN (4) M12 Select at least 3 from each quadrant 70,00 98,00 134,00 200,00 82,00 107,00 132,00 158,00 200,00 2A, 2C, 4L & 4H ONLY 2B ONLY N/A= Not Available Available manifold sizes Min X Max X Min Y/Y1 60mm (2.
PRONTO FP4555 450.00 x 550.00 Min Max W (2A) W (2B) 450.00 550.00 550.00 650.00 W 450,00 W 550,00 20.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN 550,00 250,00 184,00 145,00 107,00 69,00 82,00 107,00 132,00 158,00 200,00 450,00 M12 Select at least 3 from each quadrant 182,00 182,00 OFFSET GUIDE PIN 20.
PRONTO FP4560 450.00 x 600.00 Min Max W (2A) W (2B) 450.00 600.00 550.00 700.00 W 450,00 W 600,00 20.0 DIA GUIDE PIN (4) M12 Select at least 3 from each quadrant OFFSET GUIDE PIN 600,00 275,00 209,00 175,00 127,00 79,00 450,00 82,00 107,00 132,00 158,00 200,00 20.
PRONTO FP5050 500.00 x 500.00 Min Max W 500.00 650.00 W W 500,00 500,00 20.0 DIA GUIDE PIN (4) OFFSET GUIDE PIN M12 Select at least 3 from each quadrant 500,00 154,00 OFFSET GUIDE PIN 125,00 78,00 156,00 225,00 500,00 80,00 105,00 130,00 155,00 180,00 225,00 20.
PRONTO FP5070 500.00 x 700.00 Min Max W (2A) W (2B) 500.00 700.00 650.00 850.00 W 500,00 W 700,00 20.0 DIA GUIDE PIN (4) M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 700,00 79,00 126,00 325,00 256,00 220,00 173,00 500,00 80,00 105,00 130,00 155,00 180,00 225,00 20.
PRONTO FP5555 550.00 x 550.00 Min Max W 550.00 700.00 W 550,00 W 550,00 159,00 OFFSET GUIDE PIN 250,00 161,00 M12 Select at least 3 from each quadrant OFFSET GUIDE PIN M12 Select at least 3 from each quadrant 78,00 125,00 159,00 550,00 550,00 20.0 DIA GUIDE PIN (4) 125,00 78,00 87,00 112,00 137,00 162,00 194,00 250,00 20.
PRONTO FP5565 550.00 x 650.00 Min Max W (2A) W (2B) 550.00 650.00 700.00 800.00 W 550,00 W 650,00 20.0 DIA GUIDE PIN (4) 300,00 211,00 195,00 154,00 113,00 72,00 550,00 M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 650,00 OFFSET GUIDE PIN 87,00 112,00 137,00 162,00 194,00 250,00 209,00 20.
PRONTO FP5575 550.00 x 750.00 Min Max W (2A) W (2B) 550.00 750.00 700.00 900.00 W 550,00 W 750,00 20.0 DIA GUIDE PIN (4) M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 259,00 750,00 350,00 261,00 220,00 173,00 126,00 79,00 550,00 20.
PRONTO FP6060 600.00 x 600.00 Min Max W 600.00 750.00 W 600,00 W 600,00 20.0 DIA GUIDE PIN (4) 600,00 68,00 OFFSET GUIDE PIN 275,00 189,00 185,00 146,00 107,00 M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 187,00 82,00 117,00 162,00 187,00 220,00 275,00 600,00 20.
PRONTO FP6070 600.00 x 700.00 Min Max W (2A) W (2B) 600.00 700.00 750.00 850.00 W 600,00 W 700,00 20.0 DIA GUIDE PIN (4) M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 237,00 700,00 237,00 OFFSET GUIDE PIN 325,00 239,00 220,00 173,00 126,00 79,00 600,00 82,00 117,00 162,00 187,00 220,00 275,00 20.
PRONTO FP6080 600.00 x 800.00 W (2A) W (2B) 600.00 800.00 750.00 950.00 Min Max W 600,00 W 800,00 20.0 DIA GUIDE PIN (4) 800,00 375,00 289,00 270,00 222,00 174,00 126,00 78,00 82,00 117,00 162,00 187,00 220,00 275,00 600,00 M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 287,00 OFFSET GUIDE PIN 20.
PRONTO FP6565 650.00 x 650.00 Min Max W 650.00 800.00 W 650,00 W 650,00 20.0 DIA GUIDE PIN (4) 650,00 214,00 300,00 216,00 215,00 169,00 123,00 77,00 650,00 M12 Select at least 4 from each quadrant OFFSET GUIDE PIN 214,00 OFFSET GUIDE PIN 112,00 137,00 182,00 207,00 234,00 300,00 20.
PRONTO FP6575 650.00 x 750.00 Min Max W (2A) W (2B) 650.00 750.00 800.00 900.00 W 650,00 W 750,00 20.0 DIA GUIDE PIN (4) M12 Select at least 5 from each quadrant OFFSET GUIDE PIN 750,00 350,00 270,00 266,00 222,00 174,00 126,00 78,00 112,00 137,00 182,00 207,00 234,00 300,00 650,00 264,00 OFFSET GUIDE PIN 20.
PRONTO FP7070 700.00 x 700.00 Min Max W 700.00 890.00 W 700,00 W 700,00 20.0 DIA GUIDE PIN (4) M12 Select at least 5 per quadrant OFFSET GUIDE PIN 222,00 700,00 222,00 OFFSET GUIDE PIN 318,00 224,00 215,00 169,00 123,00 77,00 700,00 85,00 110,00 160,00 185,00 230,00 252,00 318,00 20.
PRONTO FP7080 700.00 x 800.00 W (2A) W (2B) 700.00 800.00 890.00 990.00 Min Max W 700,00 W 800,00 20.0 DIA GUIDE PIN (4) 800,00 M12 Select at least 5 from each quadrant 368,00 274,00 270,00 222,00 174,00 126,00 78,00 85,00 110,00 160,00 185,00 230,00 252,00 318,00 700,00 M12 Select at least 5 from each quadrant OFFSET GUIDE PIN 272,00 272,00 OFFSET GUIDE PIN 20.
PRONTO FP7080 Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky. 61 FP-series 2006.