Use and Care Manual

Assembly

Assembling the wheels

Assembling the handle

□ With the offset hub of a wheel (D) facing the tank's wheel

bracket, assemble a 10 mm shoulder bolt (AA) through the

holes in the wheel and tank wheel bracket.

□ Place a lock washer (CC) onto the threaded end of the

shoulder bolt (AA). Then, place a 10 mm nut (BB) on the

threaded end of the bolt (AA) and tighten securely.

□ Repeat for the other wheel (D).

□ Insert the two open ends of the handle (A) into the handle

brackets on the air compressor tank.

□ Align the holes in the handle bracket with the threaded

holes in the handle (A).

□ Attach the handle (A) to both sides of the air compressor

using 6 mm flat washers (EE) and 6 mm screws (DD).

Tighten securely.

Attaching the air filter

□ Insert the threaded end of the air filter (L) into the threaded

port of the pump head. Do not apply thread tape to the air

filter assembly's threads.

□ Rotate clockwise to tighten. Hand tighten only.