Use and Care Manual

5 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

PERSONAL SAFETY

WARNING: Never operate the compressor without a

beltguard. This unit can start automatically without warning.

Personal injury or property damage could occur from contact

with moving parts.

CAUTION: Compressor parts may be hot even if the unit is

stopped.

1. Wear safety glasses and use hearing protection when operating the unit.

2. Do not stand on or use the unit as a handhold.

3. Do not wear loose clothing or jewelry that will get caught in the moving parts of the unit.

4. Keep ﬁ ngers away from a running compressor; fast moving and hot parts will cause injury and/or burns. Compressor parts may be hot

even if the unit is stopped.

ELECTRICAL SAFETY

WARNING: Improper electrical grounding can result in

electrical shock. The wiring should be done by a qualiﬁ ed

electrician.

CAUTION: Improper electrical installation of this product

may void its warranty. Have circuit wiring performed by

qualiﬁ ed personnel, such as a licensed electrician who is

familiar with the current national and local electrical codes.

1. Follow all local electrical and safety codes as well as in the United States, the National Electrical Codes (NEC), and Occupational Safety

and Health Act (OSHA).

2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric

shock if your body is grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

4. Replace damaged cords / wiring immediately. Damaged cords / wiring increase the risk of electric shock.

SPRAYING PRECAUTIONS

WARNING: Do not spray ﬂ ammable materials in the

vicinity of open ﬂ ame or near ignition sources including the

compressor unit.

1. Do not smoke when spraying paint, insecticides, or other ﬂ ammable substances.

2. Use a face mask / respirator when spraying and spray in a well ventilated area to prevent health and ﬁ re hazards.

3. Do not direct paint or other sprayed material at the compressor. Locate the compressor as far away from the spraying area as possible

to minimize overspray accumulation on the compressor.

4. When spraying or cleaning with solvents or toxic chemicals, follow the instructions provided by the chemical manufacturer.

Safety Information (continued)