Operation Manual

11
GET READY TO EMBROIDER
11
Winding the Bobbin
1. Plug in the machine and turn it
on.
2. Place a spool of thread on the
horizontal spool pin. Then place
a spool cap on the spool of
thread that is slightly larger than
the size of the thread spool.
3. Bring thread from spool to the
left into fi rst guide (a) from the
front then under the second
guide from the back (b). Bring
thread forward and around the
bobbin tension guide (b), pulling
thread into the guide and to
the right to the bobbin winder
spindle (c).
4. Pass the thread through the
small hole on the bobbin from
inside the bobbin to out. Match
the slot on the bobbin to the pin
on the bobbin winder spindel
and push the bobbin onto
the spindel. Press the bobbin
winder spindle to the right.