Operation Manual

Please note that on disposal, this product
must be safely recycled in accordance with
relevant National legislation relating to electrical/
electronic products. If in doubt please contact
your retailer for guidance.
Troubleshooting Guide
Symptom Problem Cause Remedy
The sewing machine does not
operate.
The machine is not turned on. Turn on the machine.
The needle breaks The needle was installed incorrectly. Install the needle correctly.
The needle clamp screw is loose. Use the screwdriver to fi rmly tighten
the screw.
The fabric is pulled too much. Lightly guide the fabric.
The upper thread tension is too tight. Loosen the upper thread tension.
An incorrect bobbin is used. Use only a bobbin designed
specifi cally for this machine.
The upper thread breaks The needle is bent or blunt. Replace the needle.
The upper thread tension is too tight. Loosen the upper thread tension.
Bobbin thread does not wind
neatly on the bobbin.
Bobbin winder not fully engaged. Completely engage bobbin winder.
The lower thread is tangled or
breaks.
The bobbin thread is placed wrong. Correctly place the bobbin.