User manual

Cancel a programme
1.
Press button
1
to cancel the programme and to deactivate the appliance.
2.
Press button
1
again to activate the appliance. Now, you can set a new washing pro-
gramme.
The appliance does not drain the water.
Change a function
You can change only some functions before they operate.
1.
Press button
4
. The indicator flashes.
2. Change the function set.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
•
The indicator of the Start/Pause button
4
goes off.
• The door lock symbol goes off.
•
Press button
1
to deactivate the appliance. After five minutes from the end of the pro-
gramme, the energy saving function automatically deactivates the appliance.
When you activate the appliance again, the display show the end of the last set pro-
gramme. Turn the programme knob to set a new cycle.
• Remove the laundry from the appliance. Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew and odours.
• Close the water tap.
The washing programme is completed, but there is water in the drum:
– The drum turns regularly to prevent the creases in the laundry.
– The door stays locked.
– You must drain the water to open the door.
To drain the water:
1. If necessary, decrease the spin speed.
2.
Press the Start/Pause button
4
. The appliance drain the water and spin.
3. When the programme is completed and the door lock symbol goes off, you can open
the door
4. Deactivate the appliance.
The appliance drain and spin automatically after approximately 18 hours.
At the end of programme
17