Operators Manual

Contents
1 Introduction
1.1 Support.......................................................3
1.2 Product description.....................................3
1.3 Product overview .......................................4
1.4 Symbols on the product..............................5
1.5 Symbols on the display.............................. 5
1.6 Symbols on the battery...............................6
1.7 General manual instructions.......................6
1.8 Menu structure overview............................ 7
1.9 Display........................................................8
1.10 Keypad .................................................... 8
2 Safety
2.1 Safety information...................................... 9
2.2 Safety definitions...................................... 10
2.3 Safety instructions for operation...............10
3 Installation
3.1 Introduction - Installation.......................... 14
3.2 Main components for installation..............14
3.3 General preparations................................14
3.4 Before the installation of the wires........... 14
3.5 Installation of the product......................... 19
3.6 To put the wire into position with stakes...22
3.7 To bury the boundary wire or the
guide wire....................................................... 22
3.8 To extend the boundary wire or the
guide wire....................................................... 22
3.9 After the installation of the product...........22
3.10 To do the product settings......................23
4 Operation
4.1 Main switch...............................................28
4.2 To start the product.................................. 28
4.3 Operating modes......................................28
4.4 To stop the product.................................. 29
4.5 To switch off the product.......................... 29
4.6 Timer and Standby................................... 29
4.7 To charge the battery............................... 30
4.8 Adjust the cutting height........................... 30
5 Maintenance
5.1 Introduction - maintenance.......................31
5.2 Clean the product..................................... 31
5.3 Replace the blades...................................32
5.4 Battery...................................................... 32
5.5 Winter service...........................................33
6 Troubleshooting
6.1 Introduction - troubleshooting...................34
6.2 Fault messages........................................ 34
6.3 Information messages.............................. 39
6.4 Indicator lamp in the charging station.......40
6.5 Symptoms................................................ 41
6.6 Find breaks in the loop wire..................... 42
7 Transportation, storage and disposal
7.1 Transportation.......................................... 45
7.2 Storage.....................................................45
7.3 Disposal....................................................45
8 Technical data
8.1 Technical data.......................................... 46
9 Warranty
9.1 Warranty terms.........................................48
10 EC Declaration of Conformity
10.1 EC Declaration of Conformity.................49
2 1285 - 004 - 16.04.2020