Operators Manual

product moves back into the work area. The
factory setting is 30 cm. You can select a
distance of 20-30 cm.
1. Do steps 1–3 in
To get access to the menu
on page 20 .
2. Use the arrow button and the OK button to
move through the menu structure Settings >
Installation > Drive Past Wire .
3. Use the arrow buttons to set the distance in
cm.
4. Push the BACK button.
3.10.7 ECO mode
ECO mode stops the signal in the boundary loop,
the guide wire and the charging station, when the
product is parked or is charging.
Note: Use ECO mode if the signal from the
charging station causes interference with other
wireless equipment, for example hearing loops or
garage doors.
Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.7.1 To set the ECO mode
1. Do steps 1–3 in
To get access to the menu
on page 20 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > ECO mode
.
3. Push the OK button to select the ECO
mode .
4. Push the BACK button.
3.10.8 To avoid collisions with the
mower house
The wear on the product and the mower house
decreases when you select
Avoid house
collisions
.
1. Do steps 1–3 in To get access to the menu
on page 20 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > Mower house > Avoid house
collisions
.
3. Push the BACK button.
Note:
If
Avoid house collisions is selected it can
result in grass that is not cut around the charging
station.
3.10.9 Automower
®
Connect@Home
The product can connect to mobile devices that
have the Automower
®
Connect app installed.
Automower
®
Connect is a free app for your
mobile device. The short-range interaction with
the product is called Automower
®
Connect@Home. When pairing between the
product and app has been confirmed, you have
access to the menus and functions as long as
you are within short-range (Bluetooth
®
).
3.10.9.1 To install the Automower
®
Connect
app
1. Download the Automower
®
Connect app on
your mobile device.
2. Register in the Automower
®
Connect app.
3. Log in to your Husqvarna account in the
Automower
®
Connect app.
3.10.9.2 To pair Automower
®
Connect and the
product
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Settings
> Installation > Connect@Home > New
pairing
.
3. Select My mowers in the Automower
®
Connect app.
4. Select the plus sign (+).
5. Follow the instructions in the app.
3.10.10 General
In
General you can change the general settings
of the product.
3.10.10.1 To set the time & date
1. Do steps 1–3 in
To get access to the menu
on page 20 .
2. Use the arrow buttons and the OK button
to move through the menu structure
Settings
> General > Time & Date .
3. Use the arrow buttons to set the time and
then push the BACK button.
4. Use the arrow buttons to set the date and
then push the BACK button.
24
- Installation
982 - 001 - 12.12.2018