Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Installation
- Introduction - Installation
- Before the installation of the wires
- Before the installation of the product
- Installation of the product
- To put the wire into position with stakes
- To bury the boundary wire or the guide wire
- To change the position of the boundary wire or the guide wire
- To extend the boundary wire or the guide wire
- After the installation of the product
- To do the product settings
- Operation
- Maintenance
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Warranty
- Applicable to US/CA market
Noise emissions measured in the environ-
ment as sound power
2
115H
Measured sound power noise level, dB (A) 56
Noise emissions uncertainties K
WA
, dB (A) 3
Guaranteed sound power noise level, dB (A) 59
Sound pressure noise level at the operator’s ear,
dB (A)
3
45
The noise emission declarations conforms to EN 50636-2-107:2015
Mowing 115H
Cutting system 3 pivoted cutting blades
Blade motor speed, rpm 2500
Power consumption during cutting, W +/- 20 % 20
Cutting height, cm 5-9
Cutting width, cm 22
Narrowest possible passage, cm 60
Maximum slope for cutting area, % 30
Maximum slope for boundary wire, % 15
Maximum length boundary wire, m 500
Maximum length guide loop, m 250
IP-classification 115H
Product IPX5
Charging station IPX5
Power supply IPX4
Bluetooth
®
115H
Operating frequency band, MHz 2400 - 2484
Maximum transmitted power, dBm 8
Husqvarna AB does not guarantee full compatibility between the product and other types of wireless
systems such as remote controls, radio transmitters, hearing loops, underground electric animal
fencing or similar.
The products are made in England or the Czech Republic. See information on the rating plate. Refer to
Introduction on page 3
.
2
Noise emissions in the environment measured as sound power (L
WA
) in conformity with
EC directive 2000/14/EC. The guaranteed sound power level includes variation in produc-
tion as well as variation from the test code with 1-3 dB(A).
3
Sound pressure noise uncertainties K
pA
, 2-4 dB (A)
46 - Technical data
982 - 001 - 12.12.2018