Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Cutting equipment
- Specification of bar and saw chain
- Sharpening your chain and adjusting raker clearance
- Tensioning the saw chain
- Lubricating cutting equipment
- Checking wear on cutting equipment
- Safety instructions for using a pruning saw
- Fitting the cutting head
- Fitting the bar and chain
- Assembling the guard
- Fitting the suspension ring
- Adjusting the harness
- Filling with oil
- Check before starting
- Technical data
- Guide bar and saw chain combinations
- EC Declaration of Conformity (Applies to Europe only)
- Simboli
- Indice
- Prima dell’avviamento osservare quanto segue:
- Alla gentile clientela
- Attrezzatura di taglio
- Specifiche relative a lama e catena
- Affilatura della catena e controllo della profondità di taglio
- Tensionamento della catena
- Lubrificazione dell’attrezzatura di taglio
- Controllo dell’usura dell’attrezzatura di taglio
- Norme di sicurezza per l’uso di motosega ad asta
- Montaggio testina di taglio
- Montaggio di lama e catena
- Montaggio della protezione.
- Montaggio del gancio di sospensione
- Impostazione dell’imbracatura
- Rabbocco dell’olio
- Controlli prima dell’avviamento
- Caratteristiche tecniche
- Combinazioni di lama e catena
- Dichiarazione di conformità CE (Solo per l’Europa)
SAFETY INSTRUCTIONS
12 – English
• Whether the tip of the bar is uneven or badly worn. If
a hollow forms on the underside of the bar tip this is
due to running with a slack chain.
To prolong the life of the bar you should turn it over daily.
Safety instructions for using a
pruning saw
CAUTION! Please read the operator’s manual carefully
and make sure you understand the instructions before
using the machine.
Personal protection
• Always wear boots and other equipment described
under the heading Personal protective equipment in
the machine’s Operator’s Manual.
• Wear sturdy, non-slip boots.
• Always wear working clothes and heavy-duty long
trousers.
• Never wear loose clothing or jewellery.
• Make sure your hair does not hang below shoulder
level.
Safety instructions regarding the
surroundings
• Never allow children to use the machine.
• Ensure that no-one comes closer than 15 metres
while you are working.
• Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator’s manual.
• Never work from a ladder, stool or any other raised
position that is not fully secured.
Safety instructions while working
• Always ensure you have a safe and stable working
position.
• Always use both hands to hold the machine. Hold the
machine at the side of your body. Connect the
machine to the suspension ring on the harness
• Use your right hand to control the throttle setting.
• Make sure that your hands and feet do not come near
the cutting attachment when the engine is running.
• When the engine is switched off, keep your hands and
feet away from the cutting attachment until it has
stopped completely.
• Watch out for stumps of branches that can be thrown
out during cutting.
• Always lay the machine on the ground when you are
not using it.
• Check the working area for foreign objects such as
electricity cables and animals, etc, or other objects
!
WARNING! A faulty cutting attachment
may increase the risk of accidents.
!
WARNING! The machine can cause
serious personal injury. Read the safety
instructions carefully. Learn how to use
the machine.
!
WARNING! Cutting tool. Do not touch the
tool without first switching off the
engine.