Product Manual
Manuals
Brands
Husqvarna Manuals
Chainsaws
Reconditioned Gas Chainsaw, 14in. Bar, 38.2cc
15
16
17
18
19
20
21
22
23
24
Table Of Contents
Contents
Introduction
Operator's manual
Product overview
Symbols on the product
Product liability
Safety
Safety definitions
General safety instructions
Safety instructions for operation
Kickbacks, skating, bouncing and dropping
To prevent kickbacks, skating, bouncing and dropping
Personal protective equipment
Protective devices on the product
Stop switch
To examine the throttle trigger lockout
Guard
Fuel safety
Safety instructions for maintenance
Assembly
To assemble the guide bar and saw chain
To reset the chain brake
Operation
To use fuel
Fuel mixture ratio
To make the fuel mixture
To fill the fuel tank
To lubricate the saw chain
To start and stop
Before you start the engine
To start a cold engine
To start a warm engine
To start the engine when the fuel is too hot
To stop the engine
To fell a tree
To limb a tree
To buck a log
Maintenance
Maintenance schedule
Daily maintenance
Weekly maintenance
Monthly maintenance
Yearly maintenance
Intermittent maintenance
To adjust the idle speed
To clean the spark arrester screen
To do maintenance on the spark plug
To clean the air filter
To sharpen the saw chain
The cutter
To sharpen the cutting teeth
To adjust the depth gauge setting
To tension the saw chain
To lubricate the cutting equipment
To do a check of the saw chain lubrication
Transportation
Storage
Technical data
Accessories
Guide bar and saw chain combinations
Saw chain filing and saw chain combinations
657 - 008 - 05.05.2020
23
1
...
...
21
22
23
24
