Product Manual

Contents
Introduction..................................................................... 8
Safety..............................................................................9
Assembly...................................................................... 12
Operation...................................................................... 13
Maintenance................................................................. 16
Transportation...............................................................18
Storage......................................................................... 18
Technical data.............................................................. 18
Accessories.................................................................. 20
Introduction
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Product overview
(Fig. 1)
1. Product and serial number plate
2. Trigger lockout
3. Front handle
4. Cylinder cover
5. Chain brake and front hand guard
6. Muffler
7. Bar nose sprocket
8. Right hand guard
9. Trigger
10. Sprocket cover
11. Chain catcher
12. Guide bar
13. Saw chain
14. Starter handle
15. Chain oil tank
16. Starter
17. Fuel tank
18. Choke control
19. Rear handle
20. Stop switch
21. Idle adjustment screw
22. Primer bulb
23. Information and warning decal
24. Chain tensioning screw
25. Guide-bar cover
26. Combination tool
27. Operator's manual
Symbols on the product
(Fig. 2)
Warning
(Fig. 3) Read this manual
(Fig. 4) Use approved head protection, hearing
protection and eye protection
(Fig. 5) Use approved protective gloves
(Fig. 6) The product agrees with the applicable EC
Directives
(Fig. 7) Sound power level
(Fig. 8) Chain brake, not engaged (left). Chain
brake, engaged (right)
(Fig. 9) Choke control
(Fig. 10) Primer bulb
(Fig. 11) Refueling
(Fig. 12) Chain oil fill
(Fig. 13) This product agrees with the applicable EAC
directives
(Fig. 14) This product agrees with the applicable
Ukraine directives
(Fig. 15) Noise level
(Fig. 16) Hold the product properly with both hands
(Fig. 17) Do not use with one hand
(Fig. 18) Avoid contact with nose of guide bar
(Fig. 19) Beware of kickback
(Fig. 20) This product agrees with the applicable
Australia and New Zealand electromagnetic
compatibility directives.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
8 657 - 008 - 05.05.2020