Operators Manual

unit
120e Mark II
(P02138HV)
Equivalent vibration levels, a
hveq
rear handle
2
m/s
2
6,7
Sound power level, guaranteed (L
WA
)
3
dB(A) 116
Sound power level, measured
4
dB(A) 113
Sound pressure level at operator's ear
5
dB(A) 100
Product dimensions
Weight (excluding cutting equipment) kg (lb) 5,0 (11,0)
Oil tank volume cm
3
200
Fuel and lubrication system
Oil pump capacity at 9000 min
-1
ml/min 7
Type of oil pump Automatic
Saw chain and guide bar
Standard guide bar length cm (in) 35-40 (14-16)
Recommended bar lengths cm (in) 33-46 (13-18 )
Usable cutting length cm (in) 29-43 (11-17)
Maximum saw chain speed m/s 26,1
Saw chain pitch mm (in) 8,3 (0.325) 9,52 (3/8)
Thickness of drive links (gauge) mm (in) 1,3 (0.05)
Type of drive sprocket 0,325 and 3/8
Number of drive sprocket teeth
6 (drive sprocket
3/8), 7 (drive sprock-
et 0,325)
Accessories
Guide bar and saw chain combinations
The cutting attachments below are approved for the
product.
2
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
2
.
3
Noise emissions in the environment measured as sound power (L
WA
).
4
Noise emissions in the environment measured as sound power (L
WA
).
5
Equivalent sound pressure level is calculated as the time-weighted energy total for different sound pressure
levels under various working conditions. Typical statistical dispersion for equivalent sound pressure level is a
standard deviation of 1 dB(A).
653 - 007 - 06.05.2020 25