Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Maintenance schedule
- Daily maintenance
- Weekly maintenance
- Monthly maintenance
- Yearly maintenance
- Intermittent maintenance
- To adjust the idle speed
- To clean the spark arrester screen
- To do maintenance on the spark plug
- To clean the air filter
- To sharpen the saw chain
- To lubricate the cutting equipment
- Saw chain filing and saw chain combinations
- Transportation
- Storage
- Technical data
- Accessories
Guide bar Saw chain
Length, cm (in) Pitch, mm (in) Gauge, mm (in) Max. nose radius Type Drive link count
33 (13) 8,25 (0,325) 1,3 (0,050) 10T Husqvarna H30 56
38 (15) 8,25 (0,325) 64
35 (14) 9,52 (3/8) 7T Husqvarna S93G 52
40 (16) 9,52 (3/8) 56
45 (18) 9,52 (3/8) 62
Saw chain filing and saw chain combinations
Saw chain
Chain type Round file size Side plate angle Top plate angle File guide angle Depth gauge set-
ting
H30 3/16 in. / 4,8 mm 60° 30° 10° 0,025 in. / 0,65
mm
S93G 5/32 in. / 4,0 mm 60° 30° 0° 0,025 in. / 0,65
mm
26 653 - 007 - 06.05.2020