Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the battery and the battery compartment
- To do a check of the battery charger
- To clean the cooling system
- To sharpen the saw chain
- To tighten the saw chain
- To do a check of the saw chain lubrication
- To do the maintenance on the chain drive sprocket
- To examine the cutting equipment
- To do a check of the guide bar
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Introduktion
- Underhållsschema
- Underhåll och kontroller av produktens säkerhetsanordningar
- Kontrollera batteriet och batterifacket
- Kontrollera batteriladdaren
- Rengöra kylsystemet
- Slipa sågkedjan
- Spänna sågkedjan
- Kontrollera sågkedjans smörjning
- Utföra underhåll på kedjedrivhjulet
- Kontrollera skärutrustningen
- Kontrollera svärdet
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- Tillbehör
- EG‐försäkran om överensstämmelse
- Indledning
- Sikkerhed
- Montering
- Drift
- Indledning
- Udfør en funktionskontrol, inden du bruger produktet
- Savkædeolie
- Sådan tilsluttes batteriopladeren
- Opladning af batteriet
- Sådan startes produktet
- Sådan bruges SavE-funktionen
- Sådan standses produktet
- Oplysninger om kast
- Sådan anvendes savningsteknikken
- Sådan anvendes afkvistningsteknikken
- Sådan anvendes træfældningsteknikken
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Vedligeholdelse og eftersyn af sikkerhedsanordninger på produktet
- Sådan kontrolleres batteriet og batterirummet
- Sådan kontrolleres batteriopladeren
- Sådan renser du kølesystemet
- Sådan skærpes savkæden
- Sådan strammes savkæden
- Sådan kontrolleres savkædens smøring
- Sådan foretages vedligeholdelse af kædedrivhjulet
- Sådan efterses skæreudstyret
- Sådan kontrolleres sværdet
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- Tilbehør
- EU-overensstemmelseserklæring
- Innledning
- Sikkerhet
- Montering
- Drift
- Innledning
- Slik utfører du en funksjonskontroll før du bruker produktet
- Sagkjedeolje
- Slik kobler du til batteriladeren
- Slik lader du batteriet
- Slik starter du produktet
- Slik bruker du SavE-funksjonen
- Slik stopper du produktet
- Kastinformasjon
- Slik brukes kappeteknikken
- Slik bruker du kvistingsteknikken
- Slik bruker du trefellingsteknikken
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Vedlikehold av og kontroller av sikkerhetsanordningene på produktet
- Slik kontrollerer du batteriet og batterirommet
- Slik kontrollerer du batteriladeren
- Slik rengjør du kjølesystemet
- Slipe kjedet
- Stramme sagkjedet
- Kontrollere sagkjedesmøringen
- Slik utfører du vedlikehold på kjededrivhjulet
- Slik kontrollerer du skjæreutstyret
- Slik kontrollerer du sverdet
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- Tilbehør
- EF-samsvarserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Johdanto
- Huoltokaavio
- Laitteen turvalaitteiden huolto ja tarkistukset
- Akun ja akkukotelon tarkistus
- Akkulaturin tarkistus
- Jäähdytysjärjestelmän puhdistus
- Teräketjun teroittaminen
- Teräketjun kiristäminen
- Teräketjuvoitelun tarkistaminen
- Ketjun vetopyörän huoltaminen
- Terävarustuksen tarkistaminen
- Terälevyn tarkistaminen
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- Tarvikkeet
- EY-vaatimustenmukaisuusvakuutus
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Einleitung
- So führen Sie eine Funktionsprüfung vor Verwendung des Geräts durch
- Kettenöl
- So schließen Sie das Akkuladegerät an
- So laden Sie den Akku
- Starten des Geräts
- So verwenden Sie die SavE-Akkusparfunktion
- Gerät stoppen
- Informationen zu Rückschlägen
- So wenden Sie die Schneidtechnik an
- So verwenden Sie die Entasten-Technik
- So verwenden Sie die Baumfälltechnik
- Wartung
- Einleitung
- Wartungsplan
- Wartung und Prüfung der Sicherheitseinrichtungen auf dem Gerät
- So überprüfen Sie den Akku und das Akkufach
- Kontrollieren Sie das Akkuladegerät
- So reinigen Sie das Kühlsystem
- So schärfen Sie die Sägekette
- So spannen Sie die Sägekette
- So prüfen Sie die Schmierung der Sägekette
- So warten Sie das Kettenantriebsrad
- So prüfen Sie die Schneidausrüstung
- So prüfen Sie die Führungsschiene
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- Zubehör
- EU-Konformitätserklärung
- Introduction
- Sécurité
- Définitions de sécurité
- Consignes générales de sécurité relatives à l'outil à moteur
- Instructions générales de sécurité
- Instructions de sécurité pour le fonctionnement
- Consignes de sécurité relatives à l'utilisation de la batterie
- Consignes de sécurité relatives au chargeur de batterie
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Introduction
- Pour effectuer un contrôle du fonctionnement avant d'utiliser le produit
- Huile de chaîne
- Pour brancher le chargeur de batterie
- Pour charger la batterie
- Pour démarrer le produit
- Pour utiliser la fonction SavE
- Pour arrêter le produit
- Informations sur le rebond
- Pour utiliser la technique de coupe
- Pour utiliser la technique d'élagage
- Utilisation de la technique d'abattage
- Entretien
- Introduction
- Calendrier de maintenance
- Entretien et contrôle des dispositifs de sécurité du produit
- Contrôle de la batterie et du compartiment de batterie
- Contrôle du chargeur de batterie
- Pour nettoyer le circuit de refroidissement
- Pour affûter la chaîne de sciage
- Pour serrer la chaîne
- Pour contrôler la lubrification de la chaîne de sciage
- Pour faire l'entretien du pignon d'entraînement de la chaîne.
- Pour inspecter l'équipement de coupe
- Pour contrôler le guide-chaîne
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Onderhoudsschema
- De veiligheidsvoorzieningen op het product onderhouden en controleren
- De accu en het accucompartiment controleren
- Het laadniveau van de accu controleren
- Koelsysteem reinigen
- Zaagketting slijpen
- De zaagketting spannen
- Smering van de zaagketting controleren
- Onderhoud uitvoeren aan het kettingaandrijfwiel
- Snijuitrusting controleren
- De geleider controleren
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- Accessoires
- EG verklaring van overeenstemming
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Introduzione
- Verifica della funzionalità della macchina prima del suo utilizzo
- Olio per catena
- Per collegare il caricabatterie
- Per caricare la batteria
- Avviamento dell'unità
- Per utilizzare la funzione SavE
- Arresto dell'unità
- Informazioni per il contraccolpo
- Utilizzo della tecnica di taglio
- Esecuzione di una sramatura
- Uso della tecnica di abbattimento degli alberi
- Manutenzione
- Introduzione
- Programma di manutenzione
- Controlli e manutenzione dei dispositivi di sicurezza sul prodotto
- Esecuzione del controllo della batteria e del vano batteria
- Esecuzione del controllo del caricabatterie
- Per pulire il sistema di raffreddamento
- Per affilare la catena
- Serraggio della catena
- Controllo della lubrificazione della catena
- Manutenzione del pignone guida della catena
- Per controllare l'attrezzatura di taglio
- Controllo della barra guida
- Ricerca guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Accessori
- Dichiarazione di conformità CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Introducción
- Prueba de funcionamiento antes de utilizar el producto
- Aceite para cadena de motosierra
- Para conectar el cargador de baterías
- Carga de la batería
- Arranque del producto.
- Para usar la función SavE
- Para detener el producto
- Información sobre reculada
- Uso de la técnica de corte
- Uso de la técnica de desramado
- Uso de la técnica de tala
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Mantenimiento y comprobaciones de los dispositivos de seguridad del producto
- Comprobación de la batería y del compartimento de la batería
- Comprobación del cargador de baterías
- Para limpiar el sistema de refrigeración
- Para afilar la cadena de sierra
- Tensado de la cadena de sierra
- Para comprobar la lubricación de la cadena de sierra
- Mantenimiento del piñón de arrastre de la cadena
- Para inspeccionar el equipo de corte
- Comprobación de la espada
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Accesorios
- Declaración de conformidad CE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Manutenção e verificação dos dispositivos de segurança no produto
- Verificar a bateria e o compartimento da bateria
- Verificar o carregador da bateria
- Limpar o sistema de arrefecimento
- Para afiar a corrente da serra
- Apertar a corrente da serra
- Para verificar a lubrificação da corrente da serra
- Efetuar a manutenção do pinhão da corrente
- Para examinar o equipamento de corte
- Verificar a lâmina-guia
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Acessórios
- Declaração CE de conformidade
of inattention while operating power tools may result
in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the OFF-position before connecting to a power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
• The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
Operators should identify safety measures to protect
themselves that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger).
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool´s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritations or burns.
Service
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Chain saw safety warnings
• Keep all parts of the body away from the saw chain
when the chain saw is operating. Before you start
the chain saw, make sure the saw chain is not
contacting anything. A moment of inattention while
operating chain saws may cause entanglement of
you clothing or body with the saw chain.
• Always hold the chain saw with your right hand on
the rear handle and your left hand on the front
handle. Holding the chain saw with a reversed hand
configuration increases the risk of personal injury
and should never be done.
• Hold the power tool by insulated gripping surface
only, because the saw chain may contact hidden
wiring or its own cord. Saw chain contacting a ”live”
wire may make exposed metal parts of the power
tool ” live” and could give the operator an electric
shock.
• Wear safety glasses and hearing protection. Further
protective equipment for head, hands, legs and feet
10
1259 - 001 - 11.07.2019