Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the battery and the battery compartment
- To do a check of the battery charger
- To clean the cooling system
- To sharpen the saw chain
- To tighten the saw chain
- To do a check of the saw chain lubrication
- To do the maintenance on the chain drive sprocket
- To examine the cutting equipment
- To do a check of the guide bar
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Introduktion
- Underhållsschema
- Underhåll och kontroller av produktens säkerhetsanordningar
- Kontrollera batteriet och batterifacket
- Kontrollera batteriladdaren
- Rengöra kylsystemet
- Slipa sågkedjan
- Spänna sågkedjan
- Kontrollera sågkedjans smörjning
- Utföra underhåll på kedjedrivhjulet
- Kontrollera skärutrustningen
- Kontrollera svärdet
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- Tillbehör
- EG‐försäkran om överensstämmelse
- Indledning
- Sikkerhed
- Montering
- Drift
- Indledning
- Udfør en funktionskontrol, inden du bruger produktet
- Savkædeolie
- Sådan tilsluttes batteriopladeren
- Opladning af batteriet
- Sådan startes produktet
- Sådan bruges SavE-funktionen
- Sådan standses produktet
- Oplysninger om kast
- Sådan anvendes savningsteknikken
- Sådan anvendes afkvistningsteknikken
- Sådan anvendes træfældningsteknikken
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Vedligeholdelse og eftersyn af sikkerhedsanordninger på produktet
- Sådan kontrolleres batteriet og batterirummet
- Sådan kontrolleres batteriopladeren
- Sådan renser du kølesystemet
- Sådan skærpes savkæden
- Sådan strammes savkæden
- Sådan kontrolleres savkædens smøring
- Sådan foretages vedligeholdelse af kædedrivhjulet
- Sådan efterses skæreudstyret
- Sådan kontrolleres sværdet
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- Tilbehør
- EU-overensstemmelseserklæring
- Innledning
- Sikkerhet
- Montering
- Drift
- Innledning
- Slik utfører du en funksjonskontroll før du bruker produktet
- Sagkjedeolje
- Slik kobler du til batteriladeren
- Slik lader du batteriet
- Slik starter du produktet
- Slik bruker du SavE-funksjonen
- Slik stopper du produktet
- Kastinformasjon
- Slik brukes kappeteknikken
- Slik bruker du kvistingsteknikken
- Slik bruker du trefellingsteknikken
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Vedlikehold av og kontroller av sikkerhetsanordningene på produktet
- Slik kontrollerer du batteriet og batterirommet
- Slik kontrollerer du batteriladeren
- Slik rengjør du kjølesystemet
- Slipe kjedet
- Stramme sagkjedet
- Kontrollere sagkjedesmøringen
- Slik utfører du vedlikehold på kjededrivhjulet
- Slik kontrollerer du skjæreutstyret
- Slik kontrollerer du sverdet
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- Tilbehør
- EF-samsvarserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Johdanto
- Huoltokaavio
- Laitteen turvalaitteiden huolto ja tarkistukset
- Akun ja akkukotelon tarkistus
- Akkulaturin tarkistus
- Jäähdytysjärjestelmän puhdistus
- Teräketjun teroittaminen
- Teräketjun kiristäminen
- Teräketjuvoitelun tarkistaminen
- Ketjun vetopyörän huoltaminen
- Terävarustuksen tarkistaminen
- Terälevyn tarkistaminen
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- Tarvikkeet
- EY-vaatimustenmukaisuusvakuutus
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Einleitung
- So führen Sie eine Funktionsprüfung vor Verwendung des Geräts durch
- Kettenöl
- So schließen Sie das Akkuladegerät an
- So laden Sie den Akku
- Starten des Geräts
- So verwenden Sie die SavE-Akkusparfunktion
- Gerät stoppen
- Informationen zu Rückschlägen
- So wenden Sie die Schneidtechnik an
- So verwenden Sie die Entasten-Technik
- So verwenden Sie die Baumfälltechnik
- Wartung
- Einleitung
- Wartungsplan
- Wartung und Prüfung der Sicherheitseinrichtungen auf dem Gerät
- So überprüfen Sie den Akku und das Akkufach
- Kontrollieren Sie das Akkuladegerät
- So reinigen Sie das Kühlsystem
- So schärfen Sie die Sägekette
- So spannen Sie die Sägekette
- So prüfen Sie die Schmierung der Sägekette
- So warten Sie das Kettenantriebsrad
- So prüfen Sie die Schneidausrüstung
- So prüfen Sie die Führungsschiene
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- Zubehör
- EU-Konformitätserklärung
- Introduction
- Sécurité
- Définitions de sécurité
- Consignes générales de sécurité relatives à l'outil à moteur
- Instructions générales de sécurité
- Instructions de sécurité pour le fonctionnement
- Consignes de sécurité relatives à l'utilisation de la batterie
- Consignes de sécurité relatives au chargeur de batterie
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Introduction
- Pour effectuer un contrôle du fonctionnement avant d'utiliser le produit
- Huile de chaîne
- Pour brancher le chargeur de batterie
- Pour charger la batterie
- Pour démarrer le produit
- Pour utiliser la fonction SavE
- Pour arrêter le produit
- Informations sur le rebond
- Pour utiliser la technique de coupe
- Pour utiliser la technique d'élagage
- Utilisation de la technique d'abattage
- Entretien
- Introduction
- Calendrier de maintenance
- Entretien et contrôle des dispositifs de sécurité du produit
- Contrôle de la batterie et du compartiment de batterie
- Contrôle du chargeur de batterie
- Pour nettoyer le circuit de refroidissement
- Pour affûter la chaîne de sciage
- Pour serrer la chaîne
- Pour contrôler la lubrification de la chaîne de sciage
- Pour faire l'entretien du pignon d'entraînement de la chaîne.
- Pour inspecter l'équipement de coupe
- Pour contrôler le guide-chaîne
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Onderhoudsschema
- De veiligheidsvoorzieningen op het product onderhouden en controleren
- De accu en het accucompartiment controleren
- Het laadniveau van de accu controleren
- Koelsysteem reinigen
- Zaagketting slijpen
- De zaagketting spannen
- Smering van de zaagketting controleren
- Onderhoud uitvoeren aan het kettingaandrijfwiel
- Snijuitrusting controleren
- De geleider controleren
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- Accessoires
- EG verklaring van overeenstemming
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Introduzione
- Verifica della funzionalità della macchina prima del suo utilizzo
- Olio per catena
- Per collegare il caricabatterie
- Per caricare la batteria
- Avviamento dell'unità
- Per utilizzare la funzione SavE
- Arresto dell'unità
- Informazioni per il contraccolpo
- Utilizzo della tecnica di taglio
- Esecuzione di una sramatura
- Uso della tecnica di abbattimento degli alberi
- Manutenzione
- Introduzione
- Programma di manutenzione
- Controlli e manutenzione dei dispositivi di sicurezza sul prodotto
- Esecuzione del controllo della batteria e del vano batteria
- Esecuzione del controllo del caricabatterie
- Per pulire il sistema di raffreddamento
- Per affilare la catena
- Serraggio della catena
- Controllo della lubrificazione della catena
- Manutenzione del pignone guida della catena
- Per controllare l'attrezzatura di taglio
- Controllo della barra guida
- Ricerca guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Accessori
- Dichiarazione di conformità CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Introducción
- Prueba de funcionamiento antes de utilizar el producto
- Aceite para cadena de motosierra
- Para conectar el cargador de baterías
- Carga de la batería
- Arranque del producto.
- Para usar la función SavE
- Para detener el producto
- Información sobre reculada
- Uso de la técnica de corte
- Uso de la técnica de desramado
- Uso de la técnica de tala
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Mantenimiento y comprobaciones de los dispositivos de seguridad del producto
- Comprobación de la batería y del compartimento de la batería
- Comprobación del cargador de baterías
- Para limpiar el sistema de refrigeración
- Para afilar la cadena de sierra
- Tensado de la cadena de sierra
- Para comprobar la lubricación de la cadena de sierra
- Mantenimiento del piñón de arrastre de la cadena
- Para inspeccionar el equipo de corte
- Comprobación de la espada
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Accesorios
- Declaración de conformidad CE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Manutenção e verificação dos dispositivos de segurança no produto
- Verificar a bateria e o compartimento da bateria
- Verificar o carregador da bateria
- Limpar o sistema de arrefecimento
- Para afiar a corrente da serra
- Apertar a corrente da serra
- Para verificar a lubrificação da corrente da serra
- Efetuar a manutenção do pinhão da corrente
- Para examinar o equipamento de corte
- Verificar a lâmina-guia
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Acessórios
- Declaração CE de conformidade
• Use pants with saw protection.
• Use boots with saw protection, steel toe-cap and
non-slip sole.
• Always have a first-aid kit with you.
• Risk of sparks. Keep fire extinguishing tools and a
shovel near to prevent forest fires.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. Refer to
Maintenance and checks of the safety devices on
the product on page 20
.
• If the safety devices are defective, speak to your
Husqvarna servicing dealer.
Keypad
The warning indicator flashes if the chain brake is
engaged or if there is a risk of overload. The overload
protection temporarily stops the product and you can not
use the product until the temperature restores. If the
indicator shows a solid light, turn to your servicing
dealer. (Fig. 30)
The automatic stop function
The product has an automatic stop function that stops
the product if you do not use it for one minute.
Chain brake and front hand guard
Your product has a chain brake that stops the saw chain
if you get a kickback. The chain brake decreases the
risk of accidents but only you can prevent them.(Fig. 31)
WARNING:
Do not engage in situations
where there is a risk of kickback. Be careful
when you use your product and make sure
that the kickback zone of the guide bar does
not touch an object.
(Fig. 32)
The chain brake engages (A) manually by your left hand
or automatically by the inertia release mechanism. Push
the front hand guard (B) forward to engage the chain
brake manually. This movement starts a spring-loaded
mechanism that stops the drive sprocket.(Fig. 33)
How the chain brake is engaged is in relation to the
force of the kickback and position of the product. If you
get an intense kickback while the kickback zone is
farthest away from you, the chain brake engages by the
inertia release. If the kickback is small or the kickback
zone is nearer you, the chain brake engages manually
by your left hand.(Fig. 34)
Use the chain brake as a parking brake when you start
the product and when you move short distances. This
decreases the risk that you or a person near you
touches the saw chain.(Fig. 35)
Pull the front hand guard rearward to disengage the
chain brake.(Fig. 36)
A kickback can be very sudden and intense. Most
kickbacks are small and do not always engage the chain
brake. If a kickback occurs when you use the product,
hold tightly around the handles and do not let go. (Fig.
37)
The front hand guard also decreases the risk to touch
the saw chain if your hand lets go of the front handle.
(Fig. 38)
In the felling position you cannot engage the chain brake
manually. The chain brake can in this position only be
engaged by the inertia release mechanism.(Fig. 39)
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around the
handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
the power trigger and the power trigger lockout move
back to their initial positions.(Fig. 40)
Chain catcher
The chain catcher catches the saw chain if it breaks or
comes loose. If you have the correct chain tension, the
risk decreases. You also decrease the risk if you do the
correct maintenance on the guide bar and saw chain.
See
To tighten the saw chain on page 22
and
Maintenance on page 20
for instructions.(Fig. 41)
Right hand guard
The right hand guard works as a protection for your
hand if the saw chain breaks or comes loose. It also
prevents interference from branches and twigs when
you use the product.(Fig. 42)
Battery safety
WARNING:
Read the warning instructions
that follow before you use the product.
• Only use the BLi batteries that we recommend for
your product. The batteries are software encrypted.
• Use the BLi batteries that are rechargable as a
power supply for the related Husqvarna products
only. To prevent injury, do not use the battery as a
power supply for other devices.
• Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
• Do not use batteries that are non-rechargable.
• Do not put objects into the air slots of the battery.
1259 - 001 - 11.07.2019
13