Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the battery and the battery compartment
- To do a check of the battery charger
- To clean the cooling system
- To sharpen the saw chain
- To tighten the saw chain
- To do a check of the saw chain lubrication
- To do the maintenance on the chain drive sprocket
- To examine the cutting equipment
- To do a check of the guide bar
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Introduktion
- Underhållsschema
- Underhåll och kontroller av produktens säkerhetsanordningar
- Kontrollera batteriet och batterifacket
- Kontrollera batteriladdaren
- Rengöra kylsystemet
- Slipa sågkedjan
- Spänna sågkedjan
- Kontrollera sågkedjans smörjning
- Utföra underhåll på kedjedrivhjulet
- Kontrollera skärutrustningen
- Kontrollera svärdet
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- Tillbehör
- EG‐försäkran om överensstämmelse
- Indledning
- Sikkerhed
- Montering
- Drift
- Indledning
- Udfør en funktionskontrol, inden du bruger produktet
- Savkædeolie
- Sådan tilsluttes batteriopladeren
- Opladning af batteriet
- Sådan startes produktet
- Sådan bruges SavE-funktionen
- Sådan standses produktet
- Oplysninger om kast
- Sådan anvendes savningsteknikken
- Sådan anvendes afkvistningsteknikken
- Sådan anvendes træfældningsteknikken
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Vedligeholdelse og eftersyn af sikkerhedsanordninger på produktet
- Sådan kontrolleres batteriet og batterirummet
- Sådan kontrolleres batteriopladeren
- Sådan renser du kølesystemet
- Sådan skærpes savkæden
- Sådan strammes savkæden
- Sådan kontrolleres savkædens smøring
- Sådan foretages vedligeholdelse af kædedrivhjulet
- Sådan efterses skæreudstyret
- Sådan kontrolleres sværdet
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- Tilbehør
- EU-overensstemmelseserklæring
- Innledning
- Sikkerhet
- Montering
- Drift
- Innledning
- Slik utfører du en funksjonskontroll før du bruker produktet
- Sagkjedeolje
- Slik kobler du til batteriladeren
- Slik lader du batteriet
- Slik starter du produktet
- Slik bruker du SavE-funksjonen
- Slik stopper du produktet
- Kastinformasjon
- Slik brukes kappeteknikken
- Slik bruker du kvistingsteknikken
- Slik bruker du trefellingsteknikken
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Vedlikehold av og kontroller av sikkerhetsanordningene på produktet
- Slik kontrollerer du batteriet og batterirommet
- Slik kontrollerer du batteriladeren
- Slik rengjør du kjølesystemet
- Slipe kjedet
- Stramme sagkjedet
- Kontrollere sagkjedesmøringen
- Slik utfører du vedlikehold på kjededrivhjulet
- Slik kontrollerer du skjæreutstyret
- Slik kontrollerer du sverdet
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- Tilbehør
- EF-samsvarserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Johdanto
- Huoltokaavio
- Laitteen turvalaitteiden huolto ja tarkistukset
- Akun ja akkukotelon tarkistus
- Akkulaturin tarkistus
- Jäähdytysjärjestelmän puhdistus
- Teräketjun teroittaminen
- Teräketjun kiristäminen
- Teräketjuvoitelun tarkistaminen
- Ketjun vetopyörän huoltaminen
- Terävarustuksen tarkistaminen
- Terälevyn tarkistaminen
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- Tarvikkeet
- EY-vaatimustenmukaisuusvakuutus
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Einleitung
- So führen Sie eine Funktionsprüfung vor Verwendung des Geräts durch
- Kettenöl
- So schließen Sie das Akkuladegerät an
- So laden Sie den Akku
- Starten des Geräts
- So verwenden Sie die SavE-Akkusparfunktion
- Gerät stoppen
- Informationen zu Rückschlägen
- So wenden Sie die Schneidtechnik an
- So verwenden Sie die Entasten-Technik
- So verwenden Sie die Baumfälltechnik
- Wartung
- Einleitung
- Wartungsplan
- Wartung und Prüfung der Sicherheitseinrichtungen auf dem Gerät
- So überprüfen Sie den Akku und das Akkufach
- Kontrollieren Sie das Akkuladegerät
- So reinigen Sie das Kühlsystem
- So schärfen Sie die Sägekette
- So spannen Sie die Sägekette
- So prüfen Sie die Schmierung der Sägekette
- So warten Sie das Kettenantriebsrad
- So prüfen Sie die Schneidausrüstung
- So prüfen Sie die Führungsschiene
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- Zubehör
- EU-Konformitätserklärung
- Introduction
- Sécurité
- Définitions de sécurité
- Consignes générales de sécurité relatives à l'outil à moteur
- Instructions générales de sécurité
- Instructions de sécurité pour le fonctionnement
- Consignes de sécurité relatives à l'utilisation de la batterie
- Consignes de sécurité relatives au chargeur de batterie
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Introduction
- Pour effectuer un contrôle du fonctionnement avant d'utiliser le produit
- Huile de chaîne
- Pour brancher le chargeur de batterie
- Pour charger la batterie
- Pour démarrer le produit
- Pour utiliser la fonction SavE
- Pour arrêter le produit
- Informations sur le rebond
- Pour utiliser la technique de coupe
- Pour utiliser la technique d'élagage
- Utilisation de la technique d'abattage
- Entretien
- Introduction
- Calendrier de maintenance
- Entretien et contrôle des dispositifs de sécurité du produit
- Contrôle de la batterie et du compartiment de batterie
- Contrôle du chargeur de batterie
- Pour nettoyer le circuit de refroidissement
- Pour affûter la chaîne de sciage
- Pour serrer la chaîne
- Pour contrôler la lubrification de la chaîne de sciage
- Pour faire l'entretien du pignon d'entraînement de la chaîne.
- Pour inspecter l'équipement de coupe
- Pour contrôler le guide-chaîne
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Onderhoudsschema
- De veiligheidsvoorzieningen op het product onderhouden en controleren
- De accu en het accucompartiment controleren
- Het laadniveau van de accu controleren
- Koelsysteem reinigen
- Zaagketting slijpen
- De zaagketting spannen
- Smering van de zaagketting controleren
- Onderhoud uitvoeren aan het kettingaandrijfwiel
- Snijuitrusting controleren
- De geleider controleren
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- Accessoires
- EG verklaring van overeenstemming
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Introduzione
- Verifica della funzionalità della macchina prima del suo utilizzo
- Olio per catena
- Per collegare il caricabatterie
- Per caricare la batteria
- Avviamento dell'unità
- Per utilizzare la funzione SavE
- Arresto dell'unità
- Informazioni per il contraccolpo
- Utilizzo della tecnica di taglio
- Esecuzione di una sramatura
- Uso della tecnica di abbattimento degli alberi
- Manutenzione
- Introduzione
- Programma di manutenzione
- Controlli e manutenzione dei dispositivi di sicurezza sul prodotto
- Esecuzione del controllo della batteria e del vano batteria
- Esecuzione del controllo del caricabatterie
- Per pulire il sistema di raffreddamento
- Per affilare la catena
- Serraggio della catena
- Controllo della lubrificazione della catena
- Manutenzione del pignone guida della catena
- Per controllare l'attrezzatura di taglio
- Controllo della barra guida
- Ricerca guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Accessori
- Dichiarazione di conformità CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Introducción
- Prueba de funcionamiento antes de utilizar el producto
- Aceite para cadena de motosierra
- Para conectar el cargador de baterías
- Carga de la batería
- Arranque del producto.
- Para usar la función SavE
- Para detener el producto
- Información sobre reculada
- Uso de la técnica de corte
- Uso de la técnica de desramado
- Uso de la técnica de tala
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Mantenimiento y comprobaciones de los dispositivos de seguridad del producto
- Comprobación de la batería y del compartimento de la batería
- Comprobación del cargador de baterías
- Para limpiar el sistema de refrigeración
- Para afilar la cadena de sierra
- Tensado de la cadena de sierra
- Para comprobar la lubricación de la cadena de sierra
- Mantenimiento del piñón de arrastre de la cadena
- Para inspeccionar el equipo de corte
- Comprobación de la espada
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Accesorios
- Declaración de conformidad CE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Manutenção e verificação dos dispositivos de segurança no produto
- Verificar a bateria e o compartimento da bateria
- Verificar o carregador da bateria
- Limpar o sistema de arrefecimento
- Para afiar a corrente da serra
- Apertar a corrente da serra
- Para verificar a lubrificação da corrente da serra
- Efetuar a manutenção do pinhão da corrente
- Para examinar o equipamento de corte
- Verificar a lâmina-guia
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Acessórios
- Declaração CE de conformidade
• Turn to your servicing dealer when you select a
chain oil.
WARNING: Do not use waste oil! Waste oil
is dangerous to you and the environment.
Waste oil also causes damage to the oil
pump, the guide bar and the saw chain.
WARNING: If the lubrication of the cutting
equipment is not sufficient, it can cause the
saw chain to break. This can cause serious
injury or death to the operator.
CAUTION: If you use vegetable based chain
oil, clean the groove in the guide bar and
saw chain before long-term storage.
Otherwise there is a risk of the saw chain
oxidizing, which causes the saw chain to
become stiff and that the bar tip sprocket
gets clogged.
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet.
Note: The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool.
To charge the battery
Note:
Charge the battery if it is the first time that you use
it. A new battery is only 30% charged.
1. Connect the battery to the battery charger. (Fig. 52)
2. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
(Fig. 53)
3. When all LEDs on the battery come on, the battery is
fully charged. (Fig. 54)
4. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
5. Disconnect the battery from the battery charger.
Note:
Refer to the battery and battery charger manuals
for more information.
To start the product
1. Do a check of the power trigger and power trigger
lockout. See
To do a check of the power trigger
lockout on page 21
.
2. Push the front hand guard forward to engage the
chain brake. (Fig. 38)
3. Put the battery in the battery holder. (Fig. 55)
4. Press on the lower part of the battery until you hear
a click sound.
CAUTION: If the battery does not move
into the battery holder easily, it is not
attached correctly into the battery holder.
(Fig. 56)
5. Press and hold the start/stop button until the green
LED light comes on. (Fig. 57)
To use the SavE function
This product has a power saving function, SavE. The
SavE function decreases the chain speed and gives the
longest operation time from the battery.
Note: The SavE function does not decrease the cutting
power of the product.
1. Press the SavE button on the keypad.
2. Make sure that the green LED comes on.
3. Press the SavE button again to disconnect the
function. The green LED goes out. (Fig. 58)
To stop the product
1. Press and hold the start/stop button on the keypad
until the green LED light comes off. (Fig. 57)
2. Pull out the battery and press the battery release
buttons to remove the battery from the battery
holder. (Fig. 59)
WARNING:
Remove the battery when you
do not use or when you do not have full
vision of the product. This is to prevent
accidental start.
Kickback information
WARNING:
A kickback can cause serious
injury or death to the operator or others. To
decrease the risk you must know the causes
of kickback and how to prevent them.
A kickback occurs when the kickback zone of the guide
bar touches an object. A kickback can occur suddenly
and with large force, which throws the product in the
direction of the operator.(Fig. 60)
Kickback always occurs in the cutting plane of the guide
bar. Usually, the product is thrown against the operator
but can also move in a different direction. It is how you
use the product when the kickback occurs that causes
the direction of the movement.(Fig. 61)
Kickback only occurs if the kickback zone of the guide
bar touches an object. Do not let the kickback zone
touch an object.(Fig. 60)
16
1259 - 001 - 11.07.2019