Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the battery and the battery compartment
- To do a check of the battery charger
- To clean the cooling system
- To sharpen the saw chain
- To tighten the saw chain
- To do a check of the saw chain lubrication
- To do the maintenance on the chain drive sprocket
- To examine the cutting equipment
- To do a check of the guide bar
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Introduktion
- Underhållsschema
- Underhåll och kontroller av produktens säkerhetsanordningar
- Kontrollera batteriet och batterifacket
- Kontrollera batteriladdaren
- Rengöra kylsystemet
- Slipa sågkedjan
- Spänna sågkedjan
- Kontrollera sågkedjans smörjning
- Utföra underhåll på kedjedrivhjulet
- Kontrollera skärutrustningen
- Kontrollera svärdet
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- Tillbehör
- EG‐försäkran om överensstämmelse
- Indledning
- Sikkerhed
- Montering
- Drift
- Indledning
- Udfør en funktionskontrol, inden du bruger produktet
- Savkædeolie
- Sådan tilsluttes batteriopladeren
- Opladning af batteriet
- Sådan startes produktet
- Sådan bruges SavE-funktionen
- Sådan standses produktet
- Oplysninger om kast
- Sådan anvendes savningsteknikken
- Sådan anvendes afkvistningsteknikken
- Sådan anvendes træfældningsteknikken
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Vedligeholdelse og eftersyn af sikkerhedsanordninger på produktet
- Sådan kontrolleres batteriet og batterirummet
- Sådan kontrolleres batteriopladeren
- Sådan renser du kølesystemet
- Sådan skærpes savkæden
- Sådan strammes savkæden
- Sådan kontrolleres savkædens smøring
- Sådan foretages vedligeholdelse af kædedrivhjulet
- Sådan efterses skæreudstyret
- Sådan kontrolleres sværdet
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- Tilbehør
- EU-overensstemmelseserklæring
- Innledning
- Sikkerhet
- Montering
- Drift
- Innledning
- Slik utfører du en funksjonskontroll før du bruker produktet
- Sagkjedeolje
- Slik kobler du til batteriladeren
- Slik lader du batteriet
- Slik starter du produktet
- Slik bruker du SavE-funksjonen
- Slik stopper du produktet
- Kastinformasjon
- Slik brukes kappeteknikken
- Slik bruker du kvistingsteknikken
- Slik bruker du trefellingsteknikken
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Vedlikehold av og kontroller av sikkerhetsanordningene på produktet
- Slik kontrollerer du batteriet og batterirommet
- Slik kontrollerer du batteriladeren
- Slik rengjør du kjølesystemet
- Slipe kjedet
- Stramme sagkjedet
- Kontrollere sagkjedesmøringen
- Slik utfører du vedlikehold på kjededrivhjulet
- Slik kontrollerer du skjæreutstyret
- Slik kontrollerer du sverdet
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- Tilbehør
- EF-samsvarserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Johdanto
- Huoltokaavio
- Laitteen turvalaitteiden huolto ja tarkistukset
- Akun ja akkukotelon tarkistus
- Akkulaturin tarkistus
- Jäähdytysjärjestelmän puhdistus
- Teräketjun teroittaminen
- Teräketjun kiristäminen
- Teräketjuvoitelun tarkistaminen
- Ketjun vetopyörän huoltaminen
- Terävarustuksen tarkistaminen
- Terälevyn tarkistaminen
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- Tarvikkeet
- EY-vaatimustenmukaisuusvakuutus
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Einleitung
- So führen Sie eine Funktionsprüfung vor Verwendung des Geräts durch
- Kettenöl
- So schließen Sie das Akkuladegerät an
- So laden Sie den Akku
- Starten des Geräts
- So verwenden Sie die SavE-Akkusparfunktion
- Gerät stoppen
- Informationen zu Rückschlägen
- So wenden Sie die Schneidtechnik an
- So verwenden Sie die Entasten-Technik
- So verwenden Sie die Baumfälltechnik
- Wartung
- Einleitung
- Wartungsplan
- Wartung und Prüfung der Sicherheitseinrichtungen auf dem Gerät
- So überprüfen Sie den Akku und das Akkufach
- Kontrollieren Sie das Akkuladegerät
- So reinigen Sie das Kühlsystem
- So schärfen Sie die Sägekette
- So spannen Sie die Sägekette
- So prüfen Sie die Schmierung der Sägekette
- So warten Sie das Kettenantriebsrad
- So prüfen Sie die Schneidausrüstung
- So prüfen Sie die Führungsschiene
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- Zubehör
- EU-Konformitätserklärung
- Introduction
- Sécurité
- Définitions de sécurité
- Consignes générales de sécurité relatives à l'outil à moteur
- Instructions générales de sécurité
- Instructions de sécurité pour le fonctionnement
- Consignes de sécurité relatives à l'utilisation de la batterie
- Consignes de sécurité relatives au chargeur de batterie
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Introduction
- Pour effectuer un contrôle du fonctionnement avant d'utiliser le produit
- Huile de chaîne
- Pour brancher le chargeur de batterie
- Pour charger la batterie
- Pour démarrer le produit
- Pour utiliser la fonction SavE
- Pour arrêter le produit
- Informations sur le rebond
- Pour utiliser la technique de coupe
- Pour utiliser la technique d'élagage
- Utilisation de la technique d'abattage
- Entretien
- Introduction
- Calendrier de maintenance
- Entretien et contrôle des dispositifs de sécurité du produit
- Contrôle de la batterie et du compartiment de batterie
- Contrôle du chargeur de batterie
- Pour nettoyer le circuit de refroidissement
- Pour affûter la chaîne de sciage
- Pour serrer la chaîne
- Pour contrôler la lubrification de la chaîne de sciage
- Pour faire l'entretien du pignon d'entraînement de la chaîne.
- Pour inspecter l'équipement de coupe
- Pour contrôler le guide-chaîne
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Onderhoudsschema
- De veiligheidsvoorzieningen op het product onderhouden en controleren
- De accu en het accucompartiment controleren
- Het laadniveau van de accu controleren
- Koelsysteem reinigen
- Zaagketting slijpen
- De zaagketting spannen
- Smering van de zaagketting controleren
- Onderhoud uitvoeren aan het kettingaandrijfwiel
- Snijuitrusting controleren
- De geleider controleren
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- Accessoires
- EG verklaring van overeenstemming
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Introduzione
- Verifica della funzionalità della macchina prima del suo utilizzo
- Olio per catena
- Per collegare il caricabatterie
- Per caricare la batteria
- Avviamento dell'unità
- Per utilizzare la funzione SavE
- Arresto dell'unità
- Informazioni per il contraccolpo
- Utilizzo della tecnica di taglio
- Esecuzione di una sramatura
- Uso della tecnica di abbattimento degli alberi
- Manutenzione
- Introduzione
- Programma di manutenzione
- Controlli e manutenzione dei dispositivi di sicurezza sul prodotto
- Esecuzione del controllo della batteria e del vano batteria
- Esecuzione del controllo del caricabatterie
- Per pulire il sistema di raffreddamento
- Per affilare la catena
- Serraggio della catena
- Controllo della lubrificazione della catena
- Manutenzione del pignone guida della catena
- Per controllare l'attrezzatura di taglio
- Controllo della barra guida
- Ricerca guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Accessori
- Dichiarazione di conformità CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Introducción
- Prueba de funcionamiento antes de utilizar el producto
- Aceite para cadena de motosierra
- Para conectar el cargador de baterías
- Carga de la batería
- Arranque del producto.
- Para usar la función SavE
- Para detener el producto
- Información sobre reculada
- Uso de la técnica de corte
- Uso de la técnica de desramado
- Uso de la técnica de tala
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Mantenimiento y comprobaciones de los dispositivos de seguridad del producto
- Comprobación de la batería y del compartimento de la batería
- Comprobación del cargador de baterías
- Para limpiar el sistema de refrigeración
- Para afilar la cadena de sierra
- Tensado de la cadena de sierra
- Para comprobar la lubricación de la cadena de sierra
- Mantenimiento del piñón de arrastre de la cadena
- Para inspeccionar el equipo de corte
- Comprobación de la espada
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Accesorios
- Declaración de conformidad CE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Manutenção e verificação dos dispositivos de segurança no produto
- Verificar a bateria e o compartimento da bateria
- Verificar o carregador da bateria
- Limpar o sistema de arrefecimento
- Para afiar a corrente da serra
- Apertar a corrente da serra
- Para verificar a lubrificação da corrente da serra
- Efetuar a manutenção do pinhão da corrente
- Para examinar o equipamento de corte
- Verificar a lâmina-guia
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Acessórios
- Declaração CE de conformidade
To fell a tree
Husqvarna recommends you to make the directional
cuts and then use the safe corner method when you fell
a tree. The safe corner method helps you to make a
correct felling hinge and control the felling direction.
WARNING: Do not fell trees with a diameter
that is more than two times larger than the
guide bar length. For this, you must have
special training.
To make the directional cuts
1. Make the directional cuts. Run the directional cuts
1/4 of the diameter of the tree. Make a 45° angle
between the top cut and bottom cut.
a) Make the top cut first. Align the felling direction
mark (A) of the product with the felling direction
of the tree (B). Stay behind the product and keep
the tree on your right side. Cut with a pull stroke.
b) Make the bottom cut. Make sure that the end of
the bottom cut is at the same point as the end of
the top cut. (Fig. 78)
2. Make sure that the directional cut line is perfectly
horizontal and at right angles (90°) to the felling
direction. The directional cut line goes through the
point where the two directional cuts touch. (Fig. 79)
To make the felling cut
Note: The felling cut is made on the opposite side of the
tree from the directional cuts.
1. Make the felling cut approximately 3-5 cm/1.5-2 in
above the bottom directional cuts. The cut must be
perfectly horizontal. (Fig. 80)
2. If you have a spiked bumper, put it behind the felling
hinge.
3. Cut on the pull stroke, use full power and forward the
saw chain/guide bar slowly into the tree. Make sure
that the tree does not fall in an unwanted direction.
4. Operate a wedge or breaking bar into the cut when
the cut has accurate depth. (Fig. 81)
5. Complete the felling cut parallel with the directional
cut line. Make sure that the distance between them
is at a minimum of 1/10 of the trunk diameter. The
section of the trunk that is not cut is the felling hinge.
The felling hinge controls the felling direction. (Fig.
82)
WARNING:
You have no control of the
felling direction if the felling hinge is
gone or if it is too thin. This also applies
to if you have not made the directional
cuts and felling cut correctly.
(Fig. 83)
6. At this time, the tree will fall by its own force or with
the aid of a wedge or breaking bar. (Fig. 84)
Note: Use a guide bar that is longer than the diameter of
the tree. This helps you to make the felling cut and
directional cuts with one cutting stroke each. See
Accessories on page 26
to find out which bar lengths
we recommended for your product.
(Fig. 85)
To free a trapped tree
WARNING: It is very dangerous to remove a
trapped tree and there is a high accident
risk. Keep out of the risk zone and do not try
to fell a trapped tree.
(Fig. 86)
The safest procedure is to use one of the following
winches:
• Tractor-mounted (Fig. 87)
• Portable (Fig. 88)
To cut trees and branches that are in tension
1. Figure out which side of the tree or branch that is in
tension.
2. Figure out where the point of maximum tension is.
(Fig. 89)
3. Examine which is the safest procedure to release the
tension.
Note:
In some situations the only safe procedure is
to use a winch and not your product.
4. Keep a position where the tree or branch can not hit
you when the tension is released. (Fig. 90)
5. Make one or more cuts of sufficient depth necessary
to decrease the tension. Cut at or near the point of
maximum tension. Make the tree or branch break at
the point of maximum tension. (Fig. 91)
WARNING:
Do not cut straight through a
tree or branch that is in tension.
WARNING: Be very careful when you
cut a tree that is in tension. There is a
risk that the tree moves quickly before or
after you cut it. Serious injury can occur
if you are in an incorrect position or if
you cut incorrectly.
6. If you must cut across tree/branch, make 2 to 3 cuts,
1 in. apart and with a depth of 2 in. (Fig. 92)
7. Continue to cut more into the tree until the tree/
branch bends and the tension is released. (Fig. 93)
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.
1259 - 001 - 11.07.2019
19