Operators Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the battery and the battery compartment
- To do a check of the battery charger
- To clean the cooling system
- To sharpen the saw chain
- To tighten the saw chain
- To do a check of the saw chain lubrication
- To do the maintenance on the chain drive sprocket
- To examine the cutting equipment
- To do a check of the guide bar
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- EC Declaration of Conformity
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Introduktion
- Underhållsschema
- Underhåll och kontroller av produktens säkerhetsanordningar
- Kontrollera batteriet och batterifacket
- Kontrollera batteriladdaren
- Rengöra kylsystemet
- Slipa sågkedjan
- Spänna sågkedjan
- Kontrollera sågkedjans smörjning
- Utföra underhåll på kedjedrivhjulet
- Kontrollera skärutrustningen
- Kontrollera svärdet
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- Tillbehör
- EG‐försäkran om överensstämmelse
- Indledning
- Sikkerhed
- Montering
- Drift
- Indledning
- Udfør en funktionskontrol, inden du bruger produktet
- Savkædeolie
- Sådan tilsluttes batteriopladeren
- Opladning af batteriet
- Sådan startes produktet
- Sådan bruges SavE-funktionen
- Sådan standses produktet
- Oplysninger om kast
- Sådan anvendes savningsteknikken
- Sådan anvendes afkvistningsteknikken
- Sådan anvendes træfældningsteknikken
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Vedligeholdelse og eftersyn af sikkerhedsanordninger på produktet
- Sådan kontrolleres batteriet og batterirummet
- Sådan kontrolleres batteriopladeren
- Sådan renser du kølesystemet
- Sådan skærpes savkæden
- Sådan strammes savkæden
- Sådan kontrolleres savkædens smøring
- Sådan foretages vedligeholdelse af kædedrivhjulet
- Sådan efterses skæreudstyret
- Sådan kontrolleres sværdet
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- Tilbehør
- EU-overensstemmelseserklæring
- Innledning
- Sikkerhet
- Montering
- Drift
- Innledning
- Slik utfører du en funksjonskontroll før du bruker produktet
- Sagkjedeolje
- Slik kobler du til batteriladeren
- Slik lader du batteriet
- Slik starter du produktet
- Slik bruker du SavE-funksjonen
- Slik stopper du produktet
- Kastinformasjon
- Slik brukes kappeteknikken
- Slik bruker du kvistingsteknikken
- Slik bruker du trefellingsteknikken
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Vedlikehold av og kontroller av sikkerhetsanordningene på produktet
- Slik kontrollerer du batteriet og batterirommet
- Slik kontrollerer du batteriladeren
- Slik rengjør du kjølesystemet
- Slipe kjedet
- Stramme sagkjedet
- Kontrollere sagkjedesmøringen
- Slik utfører du vedlikehold på kjededrivhjulet
- Slik kontrollerer du skjæreutstyret
- Slik kontrollerer du sverdet
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- Tilbehør
- EF-samsvarserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Johdanto
- Huoltokaavio
- Laitteen turvalaitteiden huolto ja tarkistukset
- Akun ja akkukotelon tarkistus
- Akkulaturin tarkistus
- Jäähdytysjärjestelmän puhdistus
- Teräketjun teroittaminen
- Teräketjun kiristäminen
- Teräketjuvoitelun tarkistaminen
- Ketjun vetopyörän huoltaminen
- Terävarustuksen tarkistaminen
- Terälevyn tarkistaminen
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- Tarvikkeet
- EY-vaatimustenmukaisuusvakuutus
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Einleitung
- So führen Sie eine Funktionsprüfung vor Verwendung des Geräts durch
- Kettenöl
- So schließen Sie das Akkuladegerät an
- So laden Sie den Akku
- Starten des Geräts
- So verwenden Sie die SavE-Akkusparfunktion
- Gerät stoppen
- Informationen zu Rückschlägen
- So wenden Sie die Schneidtechnik an
- So verwenden Sie die Entasten-Technik
- So verwenden Sie die Baumfälltechnik
- Wartung
- Einleitung
- Wartungsplan
- Wartung und Prüfung der Sicherheitseinrichtungen auf dem Gerät
- So überprüfen Sie den Akku und das Akkufach
- Kontrollieren Sie das Akkuladegerät
- So reinigen Sie das Kühlsystem
- So schärfen Sie die Sägekette
- So spannen Sie die Sägekette
- So prüfen Sie die Schmierung der Sägekette
- So warten Sie das Kettenantriebsrad
- So prüfen Sie die Schneidausrüstung
- So prüfen Sie die Führungsschiene
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- Zubehör
- EU-Konformitätserklärung
- Introduction
- Sécurité
- Définitions de sécurité
- Consignes générales de sécurité relatives à l'outil à moteur
- Instructions générales de sécurité
- Instructions de sécurité pour le fonctionnement
- Consignes de sécurité relatives à l'utilisation de la batterie
- Consignes de sécurité relatives au chargeur de batterie
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Introduction
- Pour effectuer un contrôle du fonctionnement avant d'utiliser le produit
- Huile de chaîne
- Pour brancher le chargeur de batterie
- Pour charger la batterie
- Pour démarrer le produit
- Pour utiliser la fonction SavE
- Pour arrêter le produit
- Informations sur le rebond
- Pour utiliser la technique de coupe
- Pour utiliser la technique d'élagage
- Utilisation de la technique d'abattage
- Entretien
- Introduction
- Calendrier de maintenance
- Entretien et contrôle des dispositifs de sécurité du produit
- Contrôle de la batterie et du compartiment de batterie
- Contrôle du chargeur de batterie
- Pour nettoyer le circuit de refroidissement
- Pour affûter la chaîne de sciage
- Pour serrer la chaîne
- Pour contrôler la lubrification de la chaîne de sciage
- Pour faire l'entretien du pignon d'entraînement de la chaîne.
- Pour inspecter l'équipement de coupe
- Pour contrôler le guide-chaîne
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Accessoires
- Déclaration de conformité CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Onderhoudsschema
- De veiligheidsvoorzieningen op het product onderhouden en controleren
- De accu en het accucompartiment controleren
- Het laadniveau van de accu controleren
- Koelsysteem reinigen
- Zaagketting slijpen
- De zaagketting spannen
- Smering van de zaagketting controleren
- Onderhoud uitvoeren aan het kettingaandrijfwiel
- Snijuitrusting controleren
- De geleider controleren
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- Accessoires
- EG verklaring van overeenstemming
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Introduzione
- Verifica della funzionalità della macchina prima del suo utilizzo
- Olio per catena
- Per collegare il caricabatterie
- Per caricare la batteria
- Avviamento dell'unità
- Per utilizzare la funzione SavE
- Arresto dell'unità
- Informazioni per il contraccolpo
- Utilizzo della tecnica di taglio
- Esecuzione di una sramatura
- Uso della tecnica di abbattimento degli alberi
- Manutenzione
- Introduzione
- Programma di manutenzione
- Controlli e manutenzione dei dispositivi di sicurezza sul prodotto
- Esecuzione del controllo della batteria e del vano batteria
- Esecuzione del controllo del caricabatterie
- Per pulire il sistema di raffreddamento
- Per affilare la catena
- Serraggio della catena
- Controllo della lubrificazione della catena
- Manutenzione del pignone guida della catena
- Per controllare l'attrezzatura di taglio
- Controllo della barra guida
- Ricerca guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Accessori
- Dichiarazione di conformità CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Introducción
- Prueba de funcionamiento antes de utilizar el producto
- Aceite para cadena de motosierra
- Para conectar el cargador de baterías
- Carga de la batería
- Arranque del producto.
- Para usar la función SavE
- Para detener el producto
- Información sobre reculada
- Uso de la técnica de corte
- Uso de la técnica de desramado
- Uso de la técnica de tala
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Mantenimiento y comprobaciones de los dispositivos de seguridad del producto
- Comprobación de la batería y del compartimento de la batería
- Comprobación del cargador de baterías
- Para limpiar el sistema de refrigeración
- Para afilar la cadena de sierra
- Tensado de la cadena de sierra
- Para comprobar la lubricación de la cadena de sierra
- Mantenimiento del piñón de arrastre de la cadena
- Para inspeccionar el equipo de corte
- Comprobación de la espada
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Accesorios
- Declaración de conformidad CE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Manutenção e verificação dos dispositivos de segurança no produto
- Verificar a bateria e o compartimento da bateria
- Verificar o carregador da bateria
- Limpar o sistema de arrefecimento
- Para afiar a corrente da serra
- Apertar a corrente da serra
- Para verificar a lubrificação da corrente da serra
- Efetuar a manutenção do pinhão da corrente
- Para examinar o equipamento de corte
- Verificar a lâmina-guia
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Acessórios
- Declaração CE de conformidade
• Bar groove width, in/mm. The groove width in guide
bar must be the same as the chain drive links width.
(Fig. 108)
• Chain oil hole and hole for chain tensioner. The
guide bar must align with product.(Fig. 109)
• Drive link width, mm/in.(Fig. 110)
General information about how to sharpen the
cutters
Do not use a blunt saw chain. If the saw chain is blunt,
you must apply more pressure to push the guide bar
through the wood. If the saw chain is very blunt, there
will be no wood chips but sawdust.
A sharp saw chain eats through the wood and the wood
chips becomes long and thick.
The cutting tooth (A) and the depth gauge (B) together
makes the cutting part of the saw chain, the cutter. The
difference in height between the two gives the cutting
depth (depth gauge setting).(Fig. 111)
When you sharpen the cutter, think about the following:
• Filing angle.(Fig. 112)
• Cutting angle.(Fig. 113)
• File position.(Fig. 114)
• Round file diameter.(Fig. 115)
It is not easy to sharpen a saw chain correctly without
the correct equipment. Use Husqvarna file gauge. This
will help you to keep maximum cutting performance and
the kickback risk at a minimum.
WARNING: The force of the kickback
increases a lot if you do not follow the
sharpening instructions.
Note: Refer to
To sharpen the cutters on page 22
for
information about sharpening of the saw chain.
To sharpen the cutters
1. Use a round file and a file gauge to sharpen the
cutting teeth. (Fig. 116)
Note:
Refer to
Accessories on page 26
for
information about which file and gauge that
Husqvarna recommends for your saw chain.
2. Apply the file gauge correctly on to the cutter. Refer
to the instruction supplied with the file gauge.
3. Move the file from the inner side of the cutting teeth
and out. Decrease the pressure on the pull stroke.
(Fig. 117)
4. Remove material from one side of all the cutting
teeth.
5. Turn the product around and remove material on the
other side.
6. Make sure that all cutting teeth are the same length.
General information about how to adjust the
depth gauge setting
The depth gauge setting (C) decreases when you
sharpen the cutting tooth (A). To keep maximum cutting
performance you must remove filing material from the
depth gauge (B) to receive the recommended depth
gauge setting. See
Accessories on page 26
for
instructions about how to receive the correct depth
gauge setting for your saw chain.
(Fig. 118)
WARNING: The risk of kickback increases if
the depth gauge setting is too large!
To adjust the depth gauge setting
Before you adjust the depth gauge setting or sharpen
the cutters, refer to
To sharpen the cutters on page 22
,
for instructions. We recommend you to adjust the depth
gauge setting after each third operation that you
sharpen the cutting teeth.
We recommend that you use our depth gauge tool to
receive the correct depth gauge setting and bevel for the
depth gauge.
(Fig. 119)
1. Use a flat file and a depth gauge tool to adjust the
depth gauge setting. Only use Husqvarna depth
gauge tool to get the correct depth gauge setting and
bevel for the depth gauge.
2. Put the depth gauge tool on the saw chain.
Note:
See the package of the depth gauge tool for
more information about how to use the tool.
3. Use the flat file to remove the part of the depth
gauge that extends through the depth gauge tool.
(Fig. 120)
To tighten the saw chain
WARNING:
A saw chain without the correct
tension can come loose from the guide bar
and cause serious injury or death.
The more you use a saw chain the longer it becomes. It
is important to adjust the saw chain regularly.
Do a check of the saw chain tension each time you refill
with chain oil.
Note:
A new saw chain has a running-in period during
which you must do a check of the tension more
frequently.
1. Fold the knob out until it opens. (Fig. 121)
2. Turn the knob counterclockwise to loosen the drive
sprocket cover. (Fig. 122)
22
1259 - 001 - 11.07.2019