Operators Manual

120i
Sound levels
2
Equivalent sound pressure level at the operator's ear, dB(A) 88
Vibration levels
3
3,8
Saw chain/guide bar
Recommended bar lengths, inch/cm 12/30
Usable cutting length, inch/cm 10/26
Type of drive sprocket/number of teeth Spur/6
Maximum chain speed / (savE), m/s 11,5 (10)
Accessories
Guide bar and saw chain combinations
The following cutting attachments are approved for
Husqvarna 120i.
Guide bar Saw chain
Length, in Chain pitch, in Gauge, mm Max. nose radius Type Length, drive
links (no.)
12 3/8 1,1 7T Husqvarna H38 45
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
38
11/64 in/4,5
mm
75° 30° 0°
0.025 in/
0,65 mm
5056981-03 5795588-01
Approved batteries
Only use Husqvarna original BLi batteries for this
product.
2
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 2,5 dB (A).
3
Declared vibration level is for the handle with highest figures. Typical statistical dispersion for vibration level is
1,5 m/s.
26 1259 - 001 - 11.07.2019