Owner's Manual

10 TUNING THE CHASSIS 31
10.12 Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
L01909-10
–
Turn adjusting screws
1
clockwise all the way.
Info
Adjusting screws
1
are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping (125 TC EU)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Compression damping (250 TC EU)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
1
.
10.13 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
B00295-10
–
Remove protection caps
1
.
–
Turn adjusting screws
2
clockwise all the way.
Info
Adjusting screws
2
are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping (125 TC EU)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Rebound damping (250 TC EU)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
1
.