20iB EN Operator's manual 2-20
Contents Introduction..................................................................... 2 Troubleshooting............................................................ 17 Safety..............................................................................3 Transportation, storage and disposal........................... 18 Assembly...................................................................... 14 Technical data.............................................................. 18 Operation..........
Intended use The product agrees with the applicable EC directives. This product is designed for blowing leaves and other debris from lawns, pathways, asphalt roads and the like. The product is designed for household use. Symbols on the product Do not use in rain. WARNING! This product is dangerous. Injury or death can occur to the operator or bystanders if the product is not used carefully and correctly.
Note: Used to give more information that is necessary in a given situation. Introduction WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. General power tool safety warnings Check before starting • • • • • 4 Inspect the working area. Remove all loose objects, such as stones, broken glass, nails, steel wire, string etc. that could be thrown out.
• • • • • • to ensure that they do not play with the appliance. Never allow children or other persons not trained in the use of the machine and/or the battery to use or service it. Local laws may regulate the age of the user. Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m (50 ft.). Stop the machine immediately if anyone approaches.
• Never use the machine in bad weather, for instance in fog, in rain, damp or in wet locations, strong winds, intense cold, risk of lightning, etc. Extremely hot weather may cause overheating of the machine. Operation in bad weather is tiring and can lead to dangerous conditions, for instance slippery surfaces. • If the machine starts vibrating abnormally, stop the machine and remove the battery. • Walk, never run.
• • • • • • to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all usage which you consider to be beyond your capability. Make sure that you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etcetera) in case you have to move suddenly. Take great care when you work on sloping ground. Keep a good balance and a firm foothold at all times. Do not overreach.
• Clean up afterwards. Make sure that you have not blown rubbish into someone's garden. • Do not run with the product. • The powerful currents of air can move objects at such a speed that they can bounce back and cause serious eye injuries. • Do not direct the airflow towards people or animals. • Stop the motor before you assemble or dismantle accessories or other parts. • Keep all parts of your body away from hot surfaces.
Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. • Only use the product for the purpose it was intended for. • It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability.
USAs or EN 166 in EU countries. • Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not wear jewelry, short pants, sandals or go with bare feet. Put your hair up safely above shoulder level. • Keep first aid equipment close at hand. • A breathing mask should be used when there is a risk of dust. Safety devices on the product WARNING: Read the warning instructions that follow before you use the product.
professional repairs and service. If the retailer who sells your product is not a servicing dealer, ask him for the address of your nearest service agent. To do a check of the power trigger • Push and release the power trigger to make sure that it moves freely. To do a check of the keypad 1. Push and hold the start/stop button (B). C Battery safety A B a)The product is on when the LED (A) comes on. b)The product is off when the LED (A) is out. 2.
• Do not use batteries that are non-rechargable. • Do not put objects into the air slots of the battery. • Keep the battery away from sunlight, heat or open flame. The battery can cause burns and/or chemical burns. • Keep the battery away from rain and wet conditions. • Keep the battery away from microwaves and high pressure. • Do not try to disassemble or break the battery. • Use the battery in temperatures between -10 °C (14 °F) and 40 °C (104 °F).
• • • • battery outdoors. Do not charge the battery in wet conditions. Only use the battery charger where the temperature is between 5 °C (41 °F) and 40 °C (104 °F). Use the charger in an environment which has a good airflow, dry and free from dust. Do not put objects into the cooling slots of the battery charger. Do not connect the battery charger terminals to metal objects as this can short circuit the battery charger. Use approved mains sockets that are not damaged.
Assembly Introduction 2. Push the blower nozzle in fully and turn the blower nozzle to lock it to the product. WARNING: Read and understand the safety chapter before you assemble the product. To assemble the tube on the product 1. Put the blower nozzle over the tubular end of the product. Operation Introduction WARNING: Read and understand the safety chapter before you use the product.
3. When all LEDs on the battery come on, the battery is fully charged. 3 To start the product 1. Push and hold the start button until the green LED light comes on. 2 1 4. To disconnect the battery charger from the mains socket, pull the plug. Do not pull the cable. 5. Disconnect the battery from the battery charger. Note: Refer to the battery and battery charger manuals for more information. To connect the battery to the product 2. Use the power trigger to operate the product.
Maintenance Introduction WARNING: Before you do any maintenance work you must read and understand the safety chapter. Maintenance schedule WARNING: Remove the battery before you do maintenance. The following is a list of the maintenance steps that you must do on the product. Maintenance Daily Clean the outside of the machine with a clean and dry cloth. Never use water. X Keep handles dry, clean and free from oil and grease. X Make sure that the start/stop button works correctly and is not damaged.
Troubleshooting User interface User interface Possible faults Possible solution Green LED Flashes Low battery voltage. Charge the battery. Red error LED flashes Temperature deviation. Let the product cool down. Dirt in battery connectors. Clean with compressed air or a soft brush. The battery is empty. Charge the battery. Servicing is necessary. Speak to your servicing agent.
Transportation, storage and disposal Transportation and storage • • • The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements. Obey the special requirement on package and labels for commercial transportation, including by third parties and forwarding agents. Speak to a person with special training in dangerous material before you send the product. Obey all applicable national regulations. Use tape on open contacts when you put the battery in a package.
120iB Water protection level All weather use IPX4 Yes 2 No Sound levels3 Equivalent sound pressure level at the operator's ear, measured according to EN ISO 11203 and ISO 22868, dB (A): 83 Vibration levels4 Vibrations levels at handles, measured according to ISO 22867, m/s2 1.0 Fan performance Air flow in normal mode with standard nozzle, m3/min 10.3 Maximum air velocity in normal mode with standard nozzle, m/s / mph 46 / 102.
EC Declaration of Conformity EC Declaration of conformity Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: tel: +46-36-146500, declares under sole responsibility that the battery leaf blowers Husqvarna 120iB and Husqvarna120iB packed together with battery and charger, from 2019’s serial number and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES: • • • • Pär Martinsson, Development manager
1310 - 003 - 23.12.
1310 - 003 - 23.12.
1310 - 003 - 23.12.
www.husqvarna.
