Operators Manual

Note: Used to give more
information that is necessary in
a given situation.
Introduction
WARNING: Read all
safety warnings and all
instructions. Failure to
follow the warnings and
instructions may result in
electric shock, fire and/or
serious injury.
General power tool safety
warnings
Check before starting
•
Inspect the working area.
Remove all loose objects,
such as stones, broken glass,
nails, steel wire, string etc. that
could be thrown out.
•
Always remove the battery to
prevent the machine being
started by accident. Always
disconnect the battery before
any maintenance on the
machine.
•
Before using the machine and
after any impact, check for
signs of wear or damage and
repair as necessary.
•
Only use original spare parts.
•
The machine operator must
ensure that no people or
animals come closer than 15
metres while working. When
several operators are working
in the same area the safety
distance should be at least 15
metres.
•
Do an overall inspection of the
machine before use, see
maintenance schedule.
•
National or local regulations
may regulate the use. Comply
to given regulations.
Personal safety
•
Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the
influence of drugs, alcohol or
medication. A moment of
inattention while operating
power tools may result in
serious personal injury.
•
Keep bystanders away.
•
This appliance is not intended
for use by person (including
children) with reduced
physical, sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
Children should be supervised
4
1310 - 003 - 23.12.2019